We’ve come a long way since we were teens and had to clean up our rooms. Now, we have to clean up our workstations. But hey, these things don’t have to be as boring or bothersome as they used to be. Thanks to new technology, it’s a lot easier for those of us who love and work with wood to do our jobs.
No longer will your woodshop be a place where people with asthma and dust allergies come to get sick. With the best miter saw dust collection, you can keep your workstation as clean as the day you first set it up. And here are a few of my favorite best miter saw for dust collection to do the job. Read and find out more.
If you are looking for Best Miter Saw For Beginners then read this guide
Our Recommendations Best Miter Saw for Dust Collection
|BOSCH GCM12SD 15 Amp 12 Inch – Best Overall||Smooth arm with no clearance
|DEWALT 15 amps 12 in Corded Dual-Bevel Sliding Compound Miter Saw – Best Quailty||Powerful
Instead of a knob, it uses a lever
|DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound – Best Budget:||Dust collection system
|CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw – Compact:||Powerful
|Makita LS0815F Slide Compound Miter Saw||A small saw with a huge cutting capacity
Doesn’t bend when it cuts
Compared to bigger saws, it is quiet
|Makita LS1019L 10″ Dual-Bevel Sliding Compound Miter Saw||The powerful sliding design is fantastic
There are many features and extras
|Metabo HPT 12-Inch Compound Miter Saw||Laser makes it easy to line up cuts
Not a lot of weight
|Skil 10″ Dual-Bevel Sliding Compound Miter Saw||Powerful
Made of stainless steel
|WEN MM1011 15-Amp 10″ Single Bevel Compact Sliding Compound Miter Saw||Powerful
Made of stainless steel
Top 9 Best Miter Saws for Dust Collection:
1) BOSCH GCM12SD 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw – Best Overall:
The sliding arm on the Bosch Power Tools GCM12SD 12-inch miter saw lets the user cut boards up to 14 inches wide. The saw has material supports on both sides that can be pulled out to stabilize boards up to 40 inches long. It can also cut compound bevels in both directions.
The clear saw guard on the Bosch miter saw is made so that it doesn’t get in the way of the user’s view of the cut at any point.
The trigger handle has a comfortable ergonomic grip that can be used by people with either their right or left hand. It also has a padded, non-slip grip. The fences can be moved, and the numbers on the miter scale are etched into stainless steel to make them last.
2) DEWALT 15 amps 12 in. Corded Dual-Bevel Sliding Compound Miter Saw – Best Quality:
This DeWalt 12-inch sliding miter saw might be a good choice for anyone who wants a miter saw that can do almost everything well. The saw has a strong 15-amp motor, and the sliding rails let you cut boards up to 16 inches wide. With dual compound action, you don’t have to turn a board over to cut a different angle. Instead, you can just tilt the blade arm in the opposite direction.
The DeWalt miter saw also has a bright LED light that shines on the cutting area so the user can see where they are cutting. It also comes with a dust bag that can catch up to 75% of the dust it makes.
During testing, this DeWalt saw proved to be a great miter saw. Even though it didn’t have a laser guide, cutting was easy because it had an LED and a strong motor. We liked how big the cutting capacity was (though it does come at the cost of requiring a lot of room for the rails).
Also, this saw doesn’t have a knob to lock the angle in place. Instead, it has a locking lever that lets you change the angle quickly.
3) DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound – Best Budget:
The DeWalt 12-Inch single compound miter saw has all the power and precision you need for cutting and trimming around the house, and it doesn’t cost much. It can cut boards up to 8 inches wide and cuts bevels in only one direction. It has a fence that slides out and can be used to help hold the board being cut.
The DeWalt saw also has a safety feature that locks the spring arm in the “down” position unless you press a button on the back to unlock it.
During testing, there were few bells and whistles. This is because DeWalt put more emphasis on accuracy and power (which it has a lot of) than on extra features. We like how light this saw is compared to the sliders, which are much heavier.
The arm that holds the wood down is awkward, and the saw can only cut on one side, but the locking detents for the blade angle are among the best in the test. The saw is definitely worth more than what it costs.
4) CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw – Compact:
The Craftsman V20’s small size and light weight are its most important advantages. Also, the fact that it can be used even when there is no electricity is a plus. Lithium-ion batteries are getting stronger, and this miter saw can make up to 585 cuts through a 34-inch medium-density fiberboard on a single charge. It comes with both a Craftsman 20-volt rechargeable battery and a charger for that battery.
This miter saw has a strong motor that turns the blade 3,800 times per minute. This makes it easy to cut through wall studs, baseboards, and molding. It also moves, which lets you cut boards that are up to 8 inches wide.
We didn’t know what to expect from the Craftsman V20 saw, mostly because it was heavy and had a lot of plastic parts. But it was easy to assemble, cut well, and was surprisingly quiet. We could see using this saw for things like flooring or trim work, but it could also be used for building materials. The plastic and the single-bevel action were our only real complaints (rather than dual).
5) Makita LS0815F Slide Compound Miter Saw:
This Makita tool is a good choice for woodworkers who want a miter saw for the shop or to take to a job site. It can cut boards up to 12 inches wide, and it has material stabilizers that can be pulled out to hold boards in place while cutting. This miter saw is easy to move around because it only weighs 31 pounds, and it bolts to the worktable to keep it steady.
The Makita saw has a port for collecting dust and a trigger brake that stops the blade from turning when the user lets go of the trigger. It also has a “soft start” that makes it less likely to move and more accurate. The saw can also cut both up and down bevels.
We liked that this saw’s blade wasn’t as big as a 12-inch saw’s because it didn’t seem to deflect as much as a 12-inch blade might. The motor was strong enough for such a small saw, but the saw’s ability to cut was great.
Until the blade speeds up, the soft start is a little rough, giving the saw a chattery feeling. The other thing we don’t like is that the blade won’t tilt to the right, which makes the saw less useful.
6) Makita LS1019L 10″ Dual-Bevel Sliding Compound Miter Saw:
Makita’s LS1019L might be a good choice for anyone who doesn’t have a lot of space to work but still wants the most cutting power. This saw has a 10-inch blade, a dual compound bevel action, and a laser cutline for precise cuts. The 15-amp motor has a lot of power and spins at 3,200 rpm, so it can cut many different kinds of wood.
The rails on this saw are made so that they come toward the user. This lets the saw be placed closer to a wall. The zero-clearance rails on this saw make it a good choice for a workshop or other small area.
During testing, Makita did well in almost everything. The saw had a great zero-clearance arm that worked well, and it had a lot of power. Also, the laser helps make sure the cut is straight, and the dust collection is excellent.
The only problem we had with the saw was that it was a little hard to set up. Also, Makita says this saw is light, but at almost 60 pounds, it’s not that light.
7) Metabo HPT 12-Inch Compound Miter Saw:
The Metabo HPT 12-inch miter saw with laser guide is cheap and can cut bevels in both directions. It also has a strong 15-amp motor. Because it has a laser, the cutline is easy to see on the board before it is cut.
This will make it less likely for mistakes to happen. The Metabo also has a fence that can be turned, which makes it easier to cut crown molding.
The elastomer coating on the handle of this full-size saw is meant to reduce vibration, hand fatigue, and hand slippage. This is a nice feature that I didn’t expect to find on a cheaper saw.
There are both good and bad things about this saw. It has enough power to cut through almost anything that has to do with woodworking. The laser is also helpful because it makes it easy to line up cuts.
It’s also not too heavy, in part because it doesn’t have any slides. But our model’s blade wasn’t square, so we had to fix it before it would cut right. Also, the lever for changing the saw’s tilt is hard to use and doesn’t make sense.
8) Skil 10″ Dual-Bevel Sliding Compound Miter Saw:
The Skil 10′′ MS6305-00 Sliding Miter Saw is a machine with a 15 AMP motor and a speed of 4800 RPM that makes it more durable and powerful.
The miter plate on this saw is made of stainless steel, which makes it very stable to use. The Skil 10″ MS6305-00 Sliding Miter Saw is one of the most popular miters saw dust collectors because it has 11 stops. Aside from that, this saw has a cam miter-lock knob and an LED shadow line for accuracy.
Skil 10″ Miter Saw has a lot of power and can do tough jobs. It can easily cut quickly and with the most accuracy.
Different bevel cuts in different places give you a lot of freedom and convenience. You can easily cut at any of the common angles with this machine. The saw’s safety feature is very good. It comes with a 3-year warranty.
The Skil Miter Saw is a little on the heavy side, so you might have trouble using it. The price of the saw is another problem, especially if you are on a tight budget.
9) WEN MM1011 15-Amp 10″ Single Bevel Compact Sliding Compound Miter Saw:
The WEN Sliding Compound Miter Saw is a strong tool with a 15 AMP motor that can easily cut through tough materials. This inexpensive miter saw has a speed of 4500 RPM, which makes it easy to make quick, clean cuts. The carbide-tipped saw blade that comes with this machine is both durable and accurate.
This saw can rotate in both directions and has 9 positive stops, which makes it very easy to use.
The machine’s dust collection system keeps it as clean as possible by getting rid of dust particles right away. Aside from that, this miter saw has a laser guide system that makes it easy to see where you are cutting.
The WEN Miter Saw is a product that is easy to use. The tool is easy to set up and won’t give you any trouble. It gives the most accuracy.
The dual-direction bevel cuts make working with them very easy. The machine’s system for getting rid of dust is also very good. It also comes with all the parts you need and a 2-year warranty.
The WEN Miter Saw is kind of heavy. It’s also not very good for your wallet. The product may not be as good as the user thought it would be.
Buying Guide: What to Consider when Buying the Best Miter Saw for Dust Collection?
Your research and analysis show that, just like with any other tool, there are some features you should know about before buying the best miter saw for dust collection. Here, for your benefit, are some of the most important things you need to think about.
When buying a tool, the material should always be the first thing you think about. Because the material the tool is made of has a lot to do with how long it will last and how stable it will be. Now, if you want to use a miter saw to collect dust, you should know that most dust hoods are made of strong cloth. But if you have the chance to choose one made of aluminum or plastic, you should choose that one.
When using a tool like a saw, it’s important to keep it from getting too hot. So, power is one of the most important things to think about when buying a tool like that, since it affects how long the user can use the tool without it getting too hot. There are three different motor sizes for miter saws: 10, 12, and 15 AMP. You’ll need to choose the right motor size for your project.
Safety is always one of the most important things to watch out for, but it’s especially important when you’re using tools that can cut through hard things and are therefore very dangerous. So, when you buy a miter saw, make sure it has a safety feature like a trigger lock, blade guard, lockout button, or clamps. Any one of these features will help you a lot and keep you safe while you work.
Know that the longer the miter saw will last, the heavier it is. But if you want a portable miter saw that is comfortable to use, you don’t want a heavy one. Because of this, you should choose your miter saw carefully based on what you like. Choose a heavy miter saw if you need to use it for a lot of work.
The slide action and powerful motor of the Bosch GCM12SD make it a good choice for people who want a good all-around saw. If you don’t need all the bells and whistles, the DEWALT 12-inch single compound miter saw’s ease of use, power, and precision may be enough.
How do You Make a Dust Collector for a Mitre Saw?
It is important that the wood you are working on is clean and free of dust and other things. And you need to make a miter saw dust collector to do that. You can use PVC pipe for this.
There are different ways to connect PVC pipes together. You can do it yourself based on your preferences by looking at online tutorials to learn about the different ways to do it. Then, you can choose the one that works best for you.
How do I Reduce Miter Saw Dust?
There are some easy ways to cut down on miter saw dust. The first method is to use a vacuum. So, instead of using an air compressor to blow the dust away, you can use a vacuum to pick it up.
You can also clean them during your breaks to get rid of sawdust. You can blow the dust away from the blades to clean them. Also, when using a miter saw, make sure to put a cloth under it so that dust doesn’t build up on the work surface.
How can we Attach a Dust Bag with a Miter Saw?
You only need to do four things to attach a dust bag to a miter saw. The first step is to measure the miter. So, you can put the tube in the vent correctly and make sure it’s not too tight so you can take the bag out when you need to. The next step is to make sure you have the right size bag. Now put together your dust bag and hold it up to the vent to see if it fits. Last but not least, using glue keeps the creation in place.