If you’re looking for the best portable table saws on the market, then you’re in the right place. We spent weeks testing all the portable table saws on the market to find out which ones are worth the money and which ones you’ll want to avoid.
Fortunately, our team had a tonne of woodworking projects to give these portable table saws a run for their money. Each of us had different builds to work on, from simple crown moldings and cabinetry to living edge tables that required extensive detailing.
This article encloses the top 10 best portable table saws with a buying guide and the most important queries about them. So, read on.
Our Recommendations Best Portable Table Saws
|SKIL SPT99-11 Table Saw – Best Overall||Easy to put together and use.
More cutting depth
|DEWALT DWE7485Compact Jobsite Table Saw – Best Budget||Moveable and easy to carry
Resets when the power goes out or is interrupted.
This keeps accidental restarts from happening.
|DEWALT DWE7491RS Jobsite Table Saw- Best Quality||Quite powerful
The rolling stand makes it easier to put together and take apart. It also has a large work surface.
There is a three-year warranty.
|BOSCH 100XC-10 Portable Table Saw||Simple to move and use
Smart guard system
Fits cutting boards of varying thicknesses.
|SAWSTOP-JSS-120A60 Jobsite Saw||It’s easy to lower the blade.
Good for getting rid of dust
Easy to carry and not too heavy
Fingers are protected by it.
|Delta 36-6023 10 Inch Table Saw||Accurate
|Evolution – RAGE5-S Power Tools RAGE5S 10″ TCT Multi-Material Table Saw||The rip fence is accurate
Contains a siding table
|Bosch 10-Inch Portable Jobsite Table Saw||Easy to use
Made of steel
|Metabo HPT 10-Inch Miter Saw||Lightweight and portable
Not very expensive
|Milwaukee 2736-20 M18 FUEL ONE-KEY 8-1/4 in. Table||Does not take excessive space
Cuts effortlessly through sheets of varying thicknesses
Top 10 Best Portable Table Saws:
These are the best 10 portable table saws we’ve found on the market.
1) SKIL SPT99-11 Table Saw – Best Overall:
The SKILSAW SPT99-11 10-Inch Heavy-duty Worm Drive Table Saw has a powerful 3.625-inch cutting depth and a 30.5-inch rip capacity. It also works very well. This table saw makes it easy to cut boards in half. It does this quickly and accurately.
The rack and pinion mechanism makes it easy to move the fence quickly and smoothly so that accurate cuts can be made. Its 16-inch wheels easily go up and down stairs and over rough terrain because its sturdy stand gives it balance. If you want the best portable table saw for the money, get this one.
Overall, the SKILSAW SPT99-11 Table Saw is the best.
Most people who are just starting out with woodworking would like this model because it has the best of both worlds. It’s strong enough to cut through wood without leaving rough edges, but it’s still cheap enough for DIYers to use.
The SkilSaw SPT99 comes with parts like a carbide blade with 24 teeth, a dust elbow, a push stick, a rip fence, and a wrench. Based on how the wings fold and how big the wheels are, this is probably one of the best table saws. It’s great for people who only care about the quality and price of the product.
2) DEWALT DWE7485Compact Jobsite Table Saw – Best Budget:
The DEWALT DWE7485 table saw is easy to move around because it only weighs 46 pounds and has dimensions of 26.65 x 14.08 x 27.15 inches. This makes it great for people who make things at home. Its 8.25-inch-wide blade helps reduce kickback because it doesn’t take as much energy to spin as larger blades.
This table saw can cut to a depth of 2 9/16 inches at a 90-degree angle and 1 3/4 inches at a 45-degree angle. The DEWALT DWE7485 table saw has a blade that can be tilted from 90 degrees from top and bottom up to 45 degrees. It has easy-to-use blade settings that let you make small changes to the height of the blade without having to work too hard.
The DEWALT DWE7485 Compact Jobsite Table Saw is the best for cutting straight.
As a small table saw for a job site, I found this to be very easy to use. Its features made it easy and simple to work with wood, which is nothing short of a miracle. If you’re looking for something similar, this is probably a good one to try.
This table saw has a dust port that is 2.5 inches wide and a second dust port that is also 2.5 inches wide. These ports let you connect dust extraction hoses. This table saw is also made with a blade break feature that turns it off if the power goes out and keeps it from working again when the power comes back on.
When you buy a DEWALT DWE7485 table saw, you also get, among other things, an anti-kickback pawl, a push stick, a miter gauge, and a 24T 8.25-inch blade modular guard system. This is the best portable table saw for the money.
The company offers a 90-day money-back guarantee, free service for one year, and limited service support for three more years. The DEWALT DWE7485 has a big flaw in that it doesn’t work with Dado blades. This table saw has a lot of features for a low price. It is good for people who want a table saw that can be made bigger or smaller depending on the project.
3) DEWALT DWE7491RS Jobsite Table Saw- Best Quality:
DeWALT is a brand name that has been around for almost a century and is one of the first that comes to mind when talking about companies that make power tools and hand tools for both hobbyists and big companies.
With the DEWALT DWE7491RS Jobsite Table Saw, DeWALT continues to meet and exceed high functional standards for the best portable table saw for fine woodworking.
The DEWALT DWE7491RS is a 10-inch Jobsite Table Saw with a 24-tooth carbide blade that is made by DeWALT to handle bigger jobs. It can cut up to 32.5 inches wide and has a rolling stone stand, making a rack-and-pinion fence mechanism possible. This makes adjusting the fence faster, smoother, and more accurate.
Its 32.5-inch rip capacity and 15-amp engine make it perfect for quickly trimming and slicing large shelves. Its strong engine is also perfect for cutting hardwoods apart. It has a 4800 RPM blade, which makes it the best tool for cutting rigid hardwood.
At 90 degrees, the depth of the cut is 3.125 inches, and at 45 degrees, it is 2.25 inches. Its 2-inch port for collecting dust connects nicely to a vacuum, making it easy to get rid of dust without having to clean up a lot after work.
Its moveable platform is easy to put together and take apart, and its large, heavy-duty rollers make it easy to roll over stairs and other obstacles. The DEWALT DWE7491RS comes with, among other things, a table saw, a carbide blade with 24 teeth, a push stick, and a rip fence.
The DEWALT DWE7491RS Jobsite Table Saw has a larger ripping capacity than almost any other table saw is easy to move and doesn’t cost a lot. The DeWalt DWE7491RS Jobsite Table Saw is the best portable saw for 2022 if you are looking for a small table saw that you can trust to work well and accurately.
4) BOSCH 100XC-10 Portable Table Saw:
The Bosch 4100-10 was made after the Bosch 4100-09, and it has a few extra features that make it even more compact while still being able to rip professionally. It has a huge 120-volt, 15-amp motor that can be charged on any regular household circuit. It can produce up to 4.0 hp, which is very powerful.
Its motor has a soft-start mode that gradually increases the speed to reduce vibration at the beginning. This keeps the circuit breakers from tripping, which could happen when a sudden load is put on the machine.
I really liked the soft-start feature because the circuit breakers have tripped a few times when I’ve used it. I didn’t like changing them because it took longer than I thought it would. With this model, it was almost too easy to cut wood.
The Bosch 4100-10 Portable Jobsite Table Saw has a light, foldable wheel stand that can be opened and raised without lifting. It also has a 10-inch blade with 24 teeth that can be raised or lowered and tilts 45 degrees. We’d consider this one of the best-rated portable table saw.
The Bosch 4100-10 comes with a gravity-rise wheeled table saw stand, a square lock rip fence, a smart guard system, a throat plate, a multi-function blade wrench, and an adjustment wrench, among other things. You should get the Bosch 4100-10 for a durable but portable, lighter, and easy-to-raise saw.
5) SAWSTOP-JSS-120A60 Jobsite Saw:
The SawStop JSS-120A60 has a tale depth of 24 5/8″. This makes it easy for anyone to cut wood accurately and with ease. The blade is made so that it can be moved and tilted quickly and in any direction with just one touch.
The dust collection guard makes it easy to gather dust from the wood. This table saw has a control box that ensures all of its parts work well and prevents accidents.
On both sides of the saw, there is enough room to put your tools while you work. You wouldn’t have to worry about losing or being unable to find anything because everything is right there.
The saw is easy to move because it can be folded up and pushed around like a cart. The blade has an excellent safety system. If it touches a finger, it stops in less than five milliseconds and drops below the table.
The SawStop JSS-120A60 is the best choice if you are a beginner, work with a beginner, or need a table saw with excellent safety features. It’s also easy to move around, and the dust collection guard means you won’t have to spend as much time cleaning up after cutting. We suggest trying this one if you’re looking for the best portable table saw for home use.
6) Delta 36-6023 10 Inch Table Saw:
The Delta 36-6022 is easy to move on any surface because it has big wheels that can be removed. The saw is strong enough to cut through even the most complicated wood. With the “One Step” folding stand, the saw is easy to set up and put away after use. It also comes with a dust collection port that is about 2.5 inches in diameter to help keep your work site clean.
The table is made of aluminum, and if you need more length, you can use the RH extension that comes with it.
Delta 36-6022 Portable Table Saw is the easiest to use.
When you’re done cutting, the blade falls below the table, making it easy to clean and keeping you from getting hurt. Its rip fence is in the shape of a T, which makes it easy for the blade to move to the side and improves accuracy.
The Delta 36-6022 is a great tool for woodworkers because it is accurate, stable, and easy to store. You can tilt the saw to either side to make accurate bevel cuts. Since the saw is easy to clean and pack up after use, there will be little tidying up after the cut. If you want the best portable table saw on the market, get this one.
7) Evolution – RAGE5-S Power Tools RAGE5S 10″ TCT Multi-Material Table Saw:
The Rage5-S 10″ multi-material table saw has a 15A box and gear system that drives the blade to cut through thick wood and other materials like aluminum, steel, and iron without shortening the blade’s life or electric motor.
The rip fence can be set up to 45 degrees of bevel tilt and 60 degrees of the miter, which makes it easy to cut at different angles. The height of the blade can also be changed to make trench cuts. This is the best portable table saw for a job site.
Evolution RAGE5-S 10″ TCT Table Saw is the most versatile.
This table saw has a push stick that keeps the user safe when they are dealing with scraps. On both sides of the blade, there is a lot of room where you can put workpieces when they are not being used.
This table saw can be used for a lot of different things, and its frame can be folded up to make it easy to store. The table saw is easy to move around thanks to the wheels that are attached to the frame.
You can cut more than just wood with a table saw, so it will be useful if you are working with other materials. With the frame and wheels, moving the saw from where you work to where you store it is easy. It also has more power and torque than any other table saw in this class.
It lets you cut any kind of wood and walk on any ground. But some of the product’s parts, like the miter gauge, riving knife, knobs, and lever, have received bad customer reviews. This should make you think twice about buying it.
8) Bosch 10-Inch Portable Jobsite Table Saw:
The Bosch brand has been known for making high-quality spare parts for the auto industry for many years. In addition to its good work in the auto industry, the company has also made some of the best table saws on the market, such as the Bosch GTS 1031 Table Saw.
Best For Value – Bosch GTS1031 10-Inch
The Bosch GTS 1031 table saw is built to last with a steel base, so you can be sure it won’t start to rust for several years. The full rip capacity of the saw is 18 inches, and it has a smart guard system that lets you change the riving knife to fit the job.
The square lock rip fence on the saw helps you cut with precision and accuracy. For consistency, the rails on the side of the blade are a must. The Bosch GTS 1031 table saw is very easy to use and keeps the cutting area clean by collecting dust at the back of the saw.
The Bosch GTS 1031 is the best portable table saw for you if you are willing to choose durability over cutting accuracy. The rip fence might not be as good as some of the other options on this list, but the saw has other important features that make it a great buy for the price
9) Metabo HPT 10-Inch Miter Saw:
The 15-amp 10-inch miter saw is a good tool for woodworkers, framers, and trim carpenters who want accuracy, durability, and flexibility on the job (C10FCGS). This table saw is still the lightest 10-inch compound miter saw in its class. It has a large table with a vice-clamping system to hold your workpiece securely.
When you buy a Metabo HPT 10-inch Miter Saw, you get a holder, a miter saw, a 10-inch 24T TCT saw blade, a hex dust bag, and many other things.
Metabo HPT 10-Inch Miter Saw is the best lightweight table saw.
The Metabo HPT 10-Inch Miter Saw is best for people who want a table saw that won’t be too hard on their bodies because of how light it is and how small it is.
This model is great if you’re just getting started since most table saws are heavy and big. This worked very well for me, and I see how even a beginner woodworker would like to use this table saw.
After buying the product, users may need help from a professional to set it up because the instructions need to be clarified.
10) Milwaukee 2736-20 M18 FUEL ONE-KEY 8-1/4 in. Table
The Milwaukee 2736-20 M18 FUEL with ONE-KEY is made for professional handymen, remodelers, carpenters, and contractors in general. It is designed for speed, ease of use, and performance. It can cut up to 600 linear feet with each charge of its 15-amp corded saw, which has a 24.5-inch rip capacity.
It can cut through heavy materials quickly because it has a speed of 6300 RPM. This table saw also has a REDLINK Plus intelligence feature that ensures it works the best and keeps it from overheating, overcharging, or overworking.
The Milwaukee 2736-20 M18 is the best portable tool. FUEL ONE-KEY
This table saw has a rack and pinion mechanism that makes it easy to move the fence quickly and smoothly to make accurate cuts. This is likely the best small portable table saw of the year.
Its ability to work with ONE-KEY makes it a catalyst for table saws that can connect remotely to a smartphone to track and control how a product works and where it is, making it harder to steal.
When you combine this with the fact that the model can protect itself from technical problems, you have a great choice for a portable table saw.
The Milwaukee 2736-20 M18 FUEL ONE-security KEY’s feature is one of the many things that make it stand out in the table saw market. You will get a lot of use out of this table saw.
Buying Guide, What to Consider When Buying the Best Portable Table Saws?
Some of the best portable table saws for job sites can be found in workshops and places that teach woodworking. But if you want to find the best budget portable table saw, there are a few things you need to think about.
Here are a few ways to find the best portable table saw for woodworking or other uses.
When looking for the best portable saw table, the first thing to consider is how easy it is to move. What do you need to cut? How easy is it to move from place to place? Do you need to move the cutter around the work area, or must it stay in one place?
The portable saws are easy to move and use wherever they are needed. However, one problem with these saws is that they can only cut some kinds of wood, huge pieces. Also, they need to be stronger to cut hardwood; using them can make it harder to cut straight. Even though this type of saw is small, it is the best and cheapest portable table saw you can get.
Even though their sizes are different, hybrid saws are bigger than portable table saws. Most contractors use them, and they are usually put on a cart and driven around while cutting.
They can cut much bigger pieces of wood and are a good choice if you want to open a furniture store. The hybrid portable table saw is powerful and easy to move, costing a fair amount.
Stationary saws are the biggest and most fixed saws there are. They are huge machines that need the work of several people to put in place or move. Depending on your needs, stationary saws can cost several thousand dollars because of their size and what they can do. But they are useful and help you make cuts with more accuracy.
Another element to consider when selecting the best portable benchtop table saw for cutting is table space. The more space there is, the more wood it can hold at any given time.
When looking for the best portable saw table, you should also consider how the blades affect the wood. Most of the time, this depends on how big the blade on the saw is. Before paying for a saw, you must know how deep it cuts. This helps you buy wood that meets your needs.
Before buying a portable table saw, you should pay the most attention to these three things. However, you should also look at dust collection, blade size, rip capacity, riving knife, and saw stop, among other things.
If you want to buy the best portable table saw for 2023, we know that our in-depth reviews will help you make the right choice. We had fun trying out this year’s models, so we’re sure you’ll enjoy the best table saws you plan to buy.
Changing saw blades is hard for most beginners and even some people who have been working with wood for a while. But once you know how to use one, you’ll find it easy and simple.
Try your hand at some new woodworking projects to see if your model meets your needs. With this list, you can make sure you have the right cutting tools to meet your needs and give you the best woodworking experience without putting your safety at risk.
What Level of Risk does Portable Table Saws Pose?
Although there is always a risk of an accident when using a high-speed blade, a table saw is not dangerous equipment when used correctly and with a guard at all times.
What is a portable table saw?
A portable table saw is a type of saw that is designed to be compact and lightweight, making it easy to transport from one location to another. It is typically smaller in size than a stationary table saw, and can be used for a variety of cutting tasks.
What are the benefits of a portable table saw?
Portable table saws are ideal for people who need to work on job sites or in small workshops where space is limited. They are easy to transport, and can be set up quickly, making them a convenient option for contractors and DIY enthusiasts alike. Additionally, they are often more affordable than larger, stationary table saws.
What should I look for when buying a portable table saw?
When shopping for a portable table saw, it is important to consider factors such as blade size, motor power, and cutting capacity. You should also look for a saw that is sturdy and well-built, with features such as an adjustable fence and a dust collection system.
How do I maintain my portable table saw?
To keep your portable table saw in good condition, it is important to keep it clean and well-oiled. You should also check the blade alignment regularly, and replace the blade when it becomes dull or damaged. It is also important to follow all safety guidelines when using a portable table saw.
Can a portable table saw be used for heavy-duty cutting tasks?
While portable table saws are generally smaller and less powerful than stationary saws, they can still be used for heavy-duty cutting tasks. However, it is important to choose a saw with a powerful motor and a sturdy construction if you plan to use it for large, demanding projects.