10 Best Table Saw For Beginners: (Top Picks & Reviews)

When we try something new for the first time, we are all novices at some point. And every beginner knows that getting started is the hardest part. Knowing where to start is the second most challenging part. That’s the hard part, and we were beginners once too, so we want to help you find and buy the best beginner table saw.

Table saws are one of the more complicated tools in a wood shop, so you need to know what to expect. That’s where we come in. We always try to make our reviews useful and full of information. In general, we want to show how hard it can be to choose the right tools.

If you are wondering what is best table saw for beginners is, We’ve made it easy for you by reviewing the ten best table saws for beginners in this article.

Our Recommendations Best Table Saw For Beginners

Image Product Details   Price
DEWALT DWE7485Compact Jobsite Table Saw DEWALT (DWE7485)Table Saw-Best Overall This setup gives 15 Amps of power to a high torque motor

This product’s fence can be moved out to 24-1/2 inches

This table saw comes with a 90-day money-back guarantee, one year of free service
Check Price
DEWALT DWE7491RS  Jobsite Table Saw DEWALT (DWE7491RS)Table Saw-Best Quality The motor system is strong.

On-board storage for tools.

Has a good ripping capacity of 32.5 inches.
Check Price
SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00 SKIL 15 Amp 10 Inch Portable Jobsite Table Saw – Best Budget The 15-amp electric motor gives 5,000 RPMs with no load on the blade, which is a good speed for a table saw in this price range. Check Price
Bosch Power Tools 4100-10 Tablesaw Bosch Power Tools 4100-10 Table saw Easy to carry.

Circuitry with a soft start.

Smart guard system.

Space-saving design.
Check Price
SAWSTOP-JSS-120A60  Jobsite Saw SAWSTOP 10-Inch Professional Cabinet Saw The building is strong and built to last.

SawStop is a safety system for the user’s protection.

The board has a 4-inch dust port.
Check Price
Hitachi C10RJ 10 Hitachi C10RJ 10″ 15-Amp Jobsite Table Saw Strong and long-lasting building.

It has a safety switch near the knee.

Simple to use.
Check Price
Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw Circular saw blades are much cheaper to replace than circular saws.
Check Price
Rockwell RK7323 BladeRunner X2 Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw Being able to cut through different things

Blade change without tools

Suitable for small spaces
Check Price
Delta 36-6023 10 Inch Table Saw Delta 36-6013 10 Inch Table Saw The motor is strong, and the 5000 RPM blade speed is great.

Large rip capacity

The work surface is large, and the rip fence is accurate.
Check Price
Milwaukee Electric Tools 2736-21HD Table Saw Milwaukee Electric Tools 2736-21HD Table Saw Batteries that pack a punch

Very accurate and easy to adjust the fence

Easy to carry and not too heavy
Check Price

Top 10 Best Table Saw For Beginners:

1) DEWALT (DWE7485)Table Saw-Best Overall:

DEWALT DWE7485Compact Jobsite Table Saw

The DEWALT DWE7485 could be best table saw for beginners that can do many different things well.

First, this table saw is small, making it easy to move and store. Also, the blade is protected by a steel roll cage that keeps it from getting damaged if it falls or hits something.

Rack-and-pinion telescopic fence rails on this table saw should make adjustments easy, smooth, and accurate. This system gives the table saw a ripping capacity of 610 mm, which lets you cut large sheets of material to size with pinpoint accuracy.

The DEWALT DWE7485 also has an overload protection system that keeps it running well even when the wood is hard, wet, or even frozen.

If you’re looking for a portable and easy-to-use table saw for your job site, the DEWALT DWE7485 is definitely worth considering. With its compact size, it’s easy to transport and store, making it a great choice for contractors and DIY enthusiasts who need to move their tools from site to site.

One of the standout features of this table saw is its rack and pinion telescoping fence rails, which make it incredibly easy to adjust the fence for accurate cuts. Whether you’re ripping or cross-cutting, you can be sure that your cuts will be fast, smooth, and precise. With a rip capacity of 24.5 inches, you can easily rip 4×8 plywood or OSB sheets with ease.

In terms of power, the DWE7485 boasts a 15 Amp, 5800 rpm motor that delivers plenty of cutting power for even the toughest jobs. And if you need to make adjustments on the go, the onboard storage provides easy access to the site pro guarding components and push stick when not in use.

Another great feature of this table saw is its metal roll cage, which ensures job site durability. This saw is built to last and can withstand the wear and tear of daily use on the job site.

Overall, the DEWALT DWE7485 is a great choice for anyone who needs a portable, easy-to-use table saw for their job site. With its compact size, easy adjustments, variety of cuts, power, onboard storage, and guaranteed toughness, it’s a tool that you’ll rely on for years to come.

Pros
  • This setup gives 15 Amps of power to a high torque motor
  • This product’s fence can be moved out to 24-1/2 inches
  • This table saw comes with a 90-day money-back guarantee, one year of free service
Cons
  • There are a lot of settings that the user has to figure out
  • This unit’s lack of a saw stand is a bit disappointing, especially considering how much the table saw the cost.

2) DEWALT (DWE7491RS)Table Saw-Best Quality:

DEWALT DWE7491RS  Jobsite Table Saw

The DEWALT DWE7491RS table saw is made to handle tough projects with ease. It’s a tough machine that can take a beating, even if it’s used more than once.

This Jobsite table saw has a 15Amp motor that can easily reach a top speed of 4800RPM with no load on it. The massive ripping capacity of 32.5 inches is made possible by the 10-inch blade. This lets you cut large pieces of hardwood with little effort.

In terms of how much it can cut, this unit can rip up to 32.5 inches to the right of the blade and 22 inches to the left. The depth of cut at 45 degrees is 2.25 inches and at 90 degrees it is 3-1/8 inches.

There are also guarding components that can be changed without using tools. This makes it easy to make quick and accurate fence changes. Remember that the rolling stand is designed to be easy to set up and take down and to be very stable.

You can use the 2.5-inch dust collection port, which is easy to hook up to a vacuum to remove dust. The rack-and-pinion telescoping fence system makes it easy and more accurate to move the fence.

This is the best model for a woodworker who works on a variety of projects. It is a sturdy, reliable, and easy-to-use table saw that can be used for many different things.

Pros
  • The motor system is strong.
  • On-board storage for tools.
  • Has a good ripping capacity of 32.5 inches.
  • The rolling stand makes things easy for the user.
  • Has a rack and pinion fence system that works well.
  • Super-versatile.
Cons
  • For some projects, it might be a little slow.
  • Not all dado blades will work with it.

3) SKIL 15 Amp 10 Inch Portable Jobsite Table Saw – Best Budget:

SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00

What goes up must come down, and every product with a high price must have a competitor with a low price. So, here is a table saw similar to the one we just discussed. If you don’t have a lot of money but still want a good saw, this one from Skil is a good choice.

This saw has a hard-cast aluminum table that is 24 inches long, but it can be made longer if you need to cut long pieces of wood. Not every table seen on this list, or anywhere else, can be made longer. We liked that it could cut 4x materials with a cut height of up to 4 inches.

The saw comes with a sturdy steel stand that lasts for a long time, even if you put it outside in rough weather. The frame is also easy to put together and move. You won’t need to buy a stand on your own.

This saw is powered by a 15-Amp motor that speeds up to 4600RPM and cuts through hardwoods quickly and easily. You get a bevel angle range of between 2 and 47 degrees. Also, the saw comes with a rip table saw fence that is self-aligning and gives you accurate measurements.

Yes, this is the best table saw for beginners because everything works as it should. The price is right, the shipping is great, it has some great features, and it’s easy to use in general.

Pros
  • The 15-amp electric motor gives 5,000 RPMs with no load on the blade, which is a good speed for a table saw in this price range.
  • Skil’s EZ view system is made up of a silver plate with black letters that are easy to read when making adjustments to the blade.
  • Even though this table saw is heavier than some, it can be used on a work surface or with the stand that comes with it.
Cons
  • Its cast aluminum structure and thin, foldable legs make it less stable than others, and it also transfers more vibrations than others.
  • The clasps that hold the saw to the legs aren’t as strong as they could be and could be changed to give more grip and hold.

4) Bosch Power Tools 4100-10 Table Saw:

Bosch Power Tools 4100-10 Tablesaw

Here’s another thing to think about if you’re just getting started with table saws. We won’t think less of you if you choose this as your first table saw.

The saw is made to take up as little room as possible, so it will fit in your small workshop. It has a big top made of cast aluminum that gives you a lot of space to work. There is also material support that can be ripped up to 25 inches. So, yes, this will help you cover almost any width for ripping.

In terms of power, this guy has a 15-amp motor that can go up to 3650 RPM and put out 4.0hp. This makes sure that you have enough power to handle cross cuts, rip cuts, and other rough materials in carpentry.

We liked that this saw was easy to carry around. The gravity-rise wheeled stand makes it easy to get your work done. This makes it easy to move around on the job site. But it also lets you set up and take down in one move.

A smart guard system with a riving knife and anti-kickback pawls is built into the saw to protect you as you use it.

A soft start circuitry controls how hard a motor starts up, which makes it less likely that a circuit breaker will trip.

This guy will serve you well if you want a good table saw to start doing DIY projects at home. Most people who have used it say that it doesn’t last very long, especially if you use it for complicated projects. But we still think it’s good enough for beginners.

Pros
  • Easy to carry.
  • Circuitry with a soft start.
  • Smart guard system.
  • Space-saving design.
  • 25 inches of space to rip.
  • Strong motor.
Cons
  • Does not appear particularly durable.

5) SAWSTOP 10-Inch Professional Cabinet Saw:

SAWSTOP-JSS-120A60  Jobsite Saw

Are you looking for a good table saw and don’t mind spending a lot of money on it? You might work on big, professional projects and have never used a table saw before. In either case, this is the best choice. The price is not very attractive, but it is well worth every penny.

This master comes with either a 1.75hp or 3hp motor, which is strong enough to help you with any project. The heavy-weight trunnion shows that it was made to last. This guy has one of the thickest arbors out of all the 10-inch saws.

There is a professional 36-inch T-Guide Fence system that is easy to use, gives accurate measurements, and locks down securely without bending. The Sawstop system keeps you from getting hurt when you don’t need to while you work on your projects.

Even though it costs a lot, this is one of the best table saws for people who are just starting out in woodworking. It has all of the features that make it trustworthy. As expected, it is also easy to use.

Pros
  • The building is strong and built to last.
  • SawStop is a safety system for the user’s protection.
  • The board has a 4-inch dust port.
  • Strong motor.
  • Thick arbor to make it stable.
  • Poly V-ribbed belts give you the most power and the least amount of vibration.
Cons
  • To buy this saw, you will have to spend a lot of money.

6) Hitachi C10RJ 10″ 15-Amp Jobsite Table Saw:

Hitachi C10RJ 10

The saw has a 15-amp motor that spins at 4500RPM, which gives it enough power for even the toughest ripping jobs. There is a “soft start” feature that reduces noise and kickback when the saw is turned on.

A 10-inch blade with a carbide tip and 40 teeth give you a lot of cutting power. There is also a bevel range from 0 degrees to 45 degrees, which lets you make cuts between 3-1/8 inches and 2.25 inches at 0 degrees and 2.25 inches at 45 degrees.

This sawing master has a big switch and a safety cover in case the power goes out. This makes sure that the switch is safe and easy to use when you want to turn it on. You would also like how the emergency off-safety cover is placed at knee level so it is easy to use.

The best part is that this saw comes with a sturdy fold-and-roll stand. The stand lets you use the saw when you want to make cuts that are straight and don’t move around. It also makes it easy to move.

Is this a good saw for people who are just starting out? We believe so. Even though some people say it’s hard to use because it’s hard to figure out, it’s not that hard when you compare it to other table saws that are hard to use.

Pros
  • Strong and long-lasting building.
  • It has a safety switch near the knee.
  • Simple to use.
  • Large working table.
  • Good engine power.
Cons
  • It’s too heavy to carry by yourself.

7) Worx WX572L 5.5 Amp Blade Runner Portable Electric Table Top Saw:

Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

Even though this saw doesn’t have a circular blade but rather a jigsaw blade, it can still cut the same way. If you need to make rips or cross-cuts, it’s a cheap choice. It can also cut angles from 0 to 60 degrees, making it even more useful.

The two holes on each side, so you can bolt the saw to your workbench, are my favorite thing about it. If you decide to keep it mobile, the rubber feet that won’t slip should give you a nice, stable place to cut.

This saw probably won’t be good enough or fast enough for people who need to rip long boards because of its small blade and small work surface. But it could be a good fit for most small tasks. This blade also makes the Worx’s frame and weight small, which is great for people who have trouble using tools that are too heavy.

The jigsaw blade can be used for projects like making detailed cuts in wood or scroll sawing. It has five different saw blades, so in addition to wood, it can be used to cut aluminum, tile, and steel. You can also change these blades without a tool, which is different from circular saw blades, which usually need a wrench to take off or put on.

The price of this saw is lower than most, but it still has a port for collecting dust. You can connect a shop vac hose directly to the saw through this 1.25-inch port, which can reduce the amount of sawdust you have to clean up afterward. Less dust also makes it easier to see, which should make it easier to cut straight lines.

Pros
  • Circular saw blades are much cheaper to replace than circular saws.
Cons
  • The blade isn’t long enough for thicker boards, and it’s not strong enough to use every day.

8) Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw:

Rockwell RK7323 BladeRunner X2

If you’re a beginner who wants to learn how to use a table saw without spending a lot of money, the Rockwell RK7323 is a good option to think about.

First of all, this table saw is very light. It weighs only 6.8 kg, which makes it easy to move around. It even has its own handle for carrying.

The motor is made to turn at 3000 RPM, and you can use it to rip, make miter, or inside cuts for a variety of projects. Just change how the table is set up and use the tool-less blade change to switch between the 5 different blades.

The rip fence lets you make bigger cuts because it gives you more control. It has a lot of useful accessories and storage space inside to make everything easy to find.

Even though this table saw is very small, it has a standard guard and riving knife system that should give you the same flexibility as larger table saws.

The Rockwell RK7323 also has a safety switch that keeps it from turning on by accident, giving you an extra sense of safety.

Pros
  • Being able to cut through different things
  • Blade change without tools
  • Suitable for small spaces
Cons
  • Because it’s made of plastic, it’s not very strong.

9) Delta 36-6013 10 Inch Table Saw:

Delta 36-6023 10 Inch Table Saw

The Delta 36-6013 table saw has a 15-amp motor that can spin the blade at up to 5000 RPM. This is more than enough power for any beginner woodworker. Even more impressive, though, is that this table saw isn’t too expensive and has a very large rip capacity. With a cutting capacity of up to 25 inches, it can cut large pieces of wood that other bench-top table saws will have trouble with.

With a weight of 48 pounds, this table saw is on the heavier side of what you want from a portable saw. However, the fact that it has a lot of power makes up for that. We liked how level and smooth the aluminum work surface was, and the fact that the rip fence was accurate and easy to adjust made it a great tool for doing precise work.

Overall, there isn’t much the Delta 36-6013 doesn’t do well as a table saw for beginners. If it had a few more of our top pick’s features and options, it might even be better. Even so, the five-year warranty from the manufacturer still makes it a good choice to think about.

Pros
  • The motor is strong, and the 5000 RPM blade speed is great.
  • Large rip capacity
  • The work surface is large, and the rip fence is accurate.
  • Your big investment is protected by a five-year warranty.
Cons
  • Somewhat skeletal in terms of characteristics.

10) Milwaukee Electric Tools 2736-21HD Table Saw:

Milwaukee Electric Tools 2736-21HD Table Saw

The Milwaukee Electric Tools 2736-21HD is one of the most unique table saws you can buy because it can be used without a cord, which is something you don’t see on most table saws.

 It is powered by a strong lithium battery pack that gives it the same power as a 15-amp corded saw and even more blade speed, at a whopping 6,300 RPM when fully charged. This made us wonder if a cordless table saw could really replace a corded one.

Short answer: maybe. Even though we like how powerful its battery system is (it can cut 600 linear feet per charge) and how accurate and easy to adjust it is, the 8.25-inch blade just didn’t live up to our expectations.

 It works fine for the smaller jobs that most beginners do, but you may outgrow it over time and wish you had bought a 10-inch table saw instead.

Pros
  • Batteries that pack a punch
  • Very accurate and easy to adjust the fence
  • Easy to carry and not too heavy
  • Warranty for five years
Cons
  • Short 8.25″ blade
  • Not a good long-term bet
  • Only 2.5 inches is the tallest cut you can make.
  • Most likely, you’ll need to buy a second battery.
  • A portable table saw that is on the pricey side.

Buying Guide, What to Consider When Buying the Best Table Saw for beginners?

Safety:

Obviously, a table saw may be extremely dangerous; loss of fingers (or worse) does occur, therefore no matter which table saw you use, always remember to be careful and take your time when cutting lumber.

Here are some other general safety considerations to keep in mind when using a table saw:

  • Be certain that the area and space around your table saw are clear.
  • Make certain that nothing falls on you when using your table saw.
  • Allow no one to stand nearby while you are using your table saw.
  • Before using the table saw, clear the table and put on suitable eye protection and gloves.
  • Always keep an eye on where your hands are when using a table saw.
  • When you turn on the table saw, be sure you know exactly what type of cut you’re going to make (and how you’re going to make it).

Power:

A table saw’s power is usually measured in horsepower (hp). The more horsepower a table saw has, the easier it will be for the motor to cut through your material. This means you won’t have to work as hard and the cut will be smoother and cleaner. 

Lower hp models (between 3/4 and 1 1/2 hp) are fine for light-duty tasks, but you’ll need more power if you plan to use your saw every day or if you’re working with dense wood that could cause a low-powered model to overheat. It’s important to note that some saws list their power in amps instead of horsepower, which makes it hard to compare them.

Size Of The Blade:

Most table saws use circular saw blades with a diameter of 10 inches, but smaller ones can use blades with a diameter of 814 inches. The bigger the blade, the higher it will sit above the table and the deeper it will be able to cut into your workpiece. If you want to cut wood that is very thick, make sure the table saw you are thinking about can do it.

Weight:

Table saws are all pretty heavy, but some are lighter than others. If you know how much the saw weighs, you’ll know how easy it is to carry and if you’ll be able to do so safely and comfortably. If you want to buy a stationary cabinet saw, weight isn’t as important.

Capacity to Rip:

Table saws are great for making rip cuts, and the term “rip capacity” refers to how far away from the blade the fence can be. This number will tell you how wide a piece of wood they can cut well. If you want to cut really big things, like full sheets of plywood, you should get a saw that can cut at least 24 inches wide.

Size:

It’s important to make sure that your table saw will fit in your garage or workshop, so it’s important to know exactly how big it is. Even if you get a benchtop model that is smaller, you should still make sure it will fit. Taking a few extra minutes to measure your work before you buy it can save you a lot of trouble in the long run.

Dust Collection:

Table saws can make a lot of dust, so you need a dust-collection system to keep your workspace clean and reduce the amount of work you have to do at the end of the day. Most table saws have a dust port that you can connect to your shop vac or another dust-collection system. Make sure that your equipment is compatible with the size of the dust port.

Bottom Line:

So, there you have it: 10 different table saws that are great for people who are just starting to work with wood.

Any of the ten table saws we talked about in this article is a good choice for people who are ready to make an investment and buy a tool that will help them do more projects. But obviously, our Top Pick choice is DEWALT DWE7485 and if you’re on a budget you should definitely go for SKIL 15 Amp 10 Inch Portable Jobsite Table Saw.

Remember that different people like different features, accessories, abilities, and price ranges, so take your time to find the best table saw for you.

FAQs

What Should a Table Saw Never Be Used For?

Don’t ever use a table saw to make curved cuts, because table saws are only made to make straight cuts. If you try to put the material into the blade at an angle, the blade is more likely to catch it.

Also, don’t feed material into the saw from the back, which also makes kickback more likely. You can’t use a table saw to cut plastic, PVC, or iron-based metals because that’s not what it was made for.

What are the Five Rules for Using a Table Saw Safely?

Before you make any cuts, read the manual and get used to how the saw works.

  • Put on safety glasses and earplugs.
  • Use a push block instead of your fingers to move things through the blade.
  • Start the blade before you put something in it. Never put something in the blade and then turn on the power.
  • Unplug the table saw every time you want to change the blade.

How Do I Use a Table Saw Right?

Always read the owner’s manual and take all safety steps. Cut only wood or things made of wood fiber, and keep kids, pets, and other people away from the work area. Table saw injuries are among the most common ones caused by power tools, but most of them can be prevented by using good safety practices.

Related Posts:

Leave a Comment

Your email address will not be published. Required fields are marked *