Best Jobsite Table Saw

Looking for the best table saws for jobsites on the market to finish that project? Looking for a jobsite table saw but don’t know where to start stocking your workshop? We know how you feel!

Having the right tools makes the difference between a job you enjoy doing and one you can’t wait to finish. When you have the right tools for the job, everything is easier and more fun. But if you put “Best Jobsite Table Saws” into Google, you get a million different results. It’s way too much!

You’ve come to the right place if you’re looking for the best jobsite table saw for the job. We’ve been working for years, so we know a thing or two about jobsite table saws. In this article, we’ll go over our top ten picks.

Our Recommendations Best Jobsite Table Saws Reviews

Image Product Details   Price
DEWALT DWE7485Compact Jobsite Table Saw DEWALT  (DWE7485) Table Saw-Best Overall Strong motor

Superior warranty


Steel roll cage

Small weight; portability
Check Price
DEWALT DWE7491RS  Jobsite Table Saw DEWALT (DWE7491RS) Table Saw-Best Budget Wheeled and Collapsible Stand 

System for Rack and Pinion Telescoping Fence

Large Capacity of Rip
Check Price
SKIL SPT99-11 Table Saw SKIL SPT99-11 10 Inch Heavy Duty Worm Drive Table Saw-Best Quality Easy to put together and use.

More cutting depth
Check Price

Top 10 Best Jobsite Table Saw:

1)DEWALT  (DWE7485) Table Saw-Best Overall:

DEWALT DWE7485Compact Jobsite Table Saw

DEWALT is known for making high-quality tools that cost about the same or less than those made by other brands. This saw is no different, and its price is right in the middle.

The best thing about this saw is that it’s very light and easy to move around. If you need to move your table saw around your workshop or from one job spot to another, its lightweight will be helpful. So, it is the best compact jobsite table saw.

 At about 45 pounds, it’s easy to move from one job spot to another. Its table has a covering that helps cut down on friction and makes it easier to cut wood smoothly. The building is ringed by a steel roll cage that should be able to take a lot of beating and keep the tool from breaking.

This compact table saw has enough strength. This table saws motor moves at 5,800 RPM and 15 amps when it’s not being used. Hardwoods are easy to cut with the saw. You’ll also like that the back of the DEWALT DWE7485 has a dust port.

We think one of its biggest problems is that it can only use blades that are 8-1/4 inches long. You won’t be able to easily tear big sheets of plywood with it. Also, like its predecessor, the DW745, this table saw does not have a place for a dado blade. This table saw is not for you if you want to make dado cuts.

Even though this table saw is heavy, it feels very stable. This table saws table is made of cast metal to make it lighter, but it’s not at all weak.


  • Strong motor
  • Superior warranty conditions
  • Steel roll cage
  • Small weight; portability
  • Excellent value for both minor and medium-sized endeavors


  • Blade size limited to 8-1/4 inches
  • The standard tear fence is of poor quality.
  • No stand is provided
  • Can’t use Dado shears

2)DEWALT (DWE7491RS) Table Saw-Best Budget:

DEWALT DWE7491RS  Jobsite Table Saw

One of the best cheap table saws on the market right now is the DEWALT DWE7491RS Jobsite Table Saw. Not only is it famous because of how cheap it is, but also because of how quickly and well it cuts through heavy materials. You could even say that this is the best budget jobsite table saw.

The 45-pound weight of the DeWalt Jobsite Table Saw makes it easy to move. It also comes with a mount that folds up and lets you put the saw together quickly. The tool also has wheels that let you move it to different places when it’s not being used.

The DEWALT DWE7491RS best portable jobsite table saw.

With a 10-inch blade and a ripping capacity that can go up to 3212 inches, you can make cuts in treated logs and hardwoods that are 318 inches deep. This is the best compact table saw we’ve seen so far.

The Rack & Pinion Telescoping Fence System on the DEWALT DWE7491RS Jobsite Table Saw makes it easy, quick, and accurate to change the fences. The tool’s 15.0A high-speed motor gives it the power to cut through hardwoods and pressure-treated wood.

Another good thing about this table saw is that it has a safe place to store extra parts. Nothing is more frustrating than trying to find a guard you just used but can’t remember where you put it. The DEWALT DWE7491RS has a place for you to put these things, which will save you a lot of time.

There are also two things that gather dust. One is near the guard for the blade, and the other is under the table. Depending on the type of wood you are cutting, the dust catchers should be able to get back about 80% of the dust that is released.

Lastly, the DEWALT DWE7491RS is one of the best home/shop table saws because it can be used for both heavy and light work. It is also one of the best table saws for home improvement projects. The tool is easy to learn and use, and its light weight is another plus.


  • Wheeled and Collapsible Stand 
  • System for Rack and Pinion Telescoping Fence
  • Large Capacity of Rip


  • Not always, but the miter tools are right. 

3)SKIL SPT99-11 10 Inch Heavy Duty Worm Drive Table Saw-Best Quality:

SKIL SPT99-11 Table Saw

The SKILSAW SPT99-11 10-Inch Heavy-duty Worm Drive Table Saw has a powerful 3.625-inch cutting depth and a 30.5-inch rip capacity. It also works very well. This table saw makes it easy to cut boards in half. It does this quickly and accurately.

The rack and pinion mechanism makes it easy to move the fence quickly and smoothly so that accurate cuts can be made. Its 16-inch wheels easily go up and down stairs and over rough terrain because its sturdy stand gives it balance. If you want the best portable table saw for the money, get this one.

Overall, the SKILSAW SPT99-11 is one of the best 10 jobsite table saw.

Most people who are just starting out with woodworking would like this model because it has the best of both worlds. It’s strong enough to cut through wood without leaving rough edges, but it’s still cheap enough for DIYers to use.

The SkilSaw SPT99 comes with parts like a carbide blade with 24 teeth, a dust elbow, a push stick, a rip fence, and a wrench. Based on how the wings fold and how big the wheels are, this is probably one of the best table saws. It’s great for people who only care about the quality and price of the product.


  • Easy to put together and use.
  • More cutting depth


  • Bad service to customers

4)Bosch GTS1031 10-Inch Portable Jobsite Table Saw-Best Value:

Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle

Almost certainly, there are a million movable table saws. Few of them, though, can match the power of the Bosch GTS1031 10-Inch Portable Jobsite Table Saw. Because of how well it works, we think this is the best compact table saw for the money.

It might be easy to carry around, and you might even be able to use it to cut things at home. But if you take it to a job site and use it to cut a piece of wet wood, you might blow the motor.

With the Bosch GTS1031, you get a powerful tool that is easy to move around. It has a 15-amp motor that can cut through hard materials. The saw’s brushes can be changed to make it last longer. The GTS1031 also has well-oiled grips that make it easy to change the angle and height of the blade in no time.

Most movable jobsite table saws have this problem, but with the GTS1031, you can easily lower or raise the blade in any direction you want. This makes it one of the safest and best jobsite table saw for woodworking.

The Bosch GTS1031 is not only strong and compact, but it is also very safe to use. It has a guard that keeps fingers from getting too close to the blades. There is also a riving knife with two sets of pins that hold it in the lower and upper places.

The GTS1031 also makes it easy and quick to replace. You should be able to take the saw apart and put it back together in less than two minutes. Even the blade systems are easy to take off and put back on, which isn’t something that most pocket saws have. The GTS1031 is one of the best jobsite table saws, which is why most reviews of jobsite table saws will always include it.


  • The 18-inch SquareLock rip fence enables precise and seamless cutting.
  • Transportable and light (52 pounds)
  • A smart security system


  • More costly than comparable portable table saws

5)Delta 36-6023 10 Inch Table Saw:

Delta 36-6023 10 Inch Table Saw

If you want a plug-in table saw, this one from Delta is the best. The saw comes with a moving stand made of tubes that makes it easy to move. It has a tough 10-inch blade with a steel tip. Want to get a new blade for it? The built-in arbor lock makes it easy. 

The 15-amp motor can cut through dado or other thick materials at 3,600 RPM, and the T-square, three-point locking rip fence makes cutting even easier.

The table top is made of cast iron and has a lot of space to work on. Using large pieces of wood? Steel rails were moved apart to make room. Sawdust can be collected without making a mess with a dust collection system that is easy to hook up to a wet/dry vacuum.

Getting the same cut over and over? There is a locked bevel and wheels for adjusting the height so that they are all the same size and shape. There is also a 0.75-inch-wide miter gauge with T-slots to hold feather boards and other tools.

This table saw from Delta comes with a five-year limited warranty, which is one of the best on our list, so you can buy it with confidence. Just remember that this is a contractor-style table saw, so it is made for big jobs. 


  • Large rip capacity
  • Has dado capability
  • Compared to other table saws, this one has a deeper cut.


  • Many owners were unhappy with the T-slot miter gauge.
  • No soft start
  • No sheet support on the left side

6)SawStop 10-Inch Professional Cabinet Saw:

SAWSTOP 10-Inch Contractor Saw

SawStop Professional Cabinet Saws were made to handle tough jobs. This is the best table saw for small shops because it works well with any hard material. The cuts are quick, smooth, and even. It also has a lot of high-tech features that make it safe to use.

For example, when the SawStop Professional Cabinet Saw blade touches the skin, it stops right away. The blade stops in about 5 milliseconds, which makes it less likely that someone will get hurt seriously.

The SawStop 10-Inch Professional Saw is the best cabinet table saw.

Also, the saw’s arbor and trunnion are made of good materials that make it strong, stable, and accurate.

 With a maximum gap of 0.010″ and a gas piston that raises the table, there is room for smoothness and adjustment.

The machine also has the Overarm Dust Collection type, which allows it to pick up 99% of the dust on the table. Dust is also kept away from the blades and sent into the 4″ port by blade guards.

Lastly, the machine has a control box with a power paddle, an on/off switch, and an onboard computer that checks all of the machine’s systems. We think this is the best table saw for home use because it has a function that lets you know when and where the machine is having trouble.


  • New ways to keep safe
  • Getting rid of dust
  • Longevity and strength


  • Costs a lot.
  • It weighs more than 400 pounds and is very heavy.

7)SKIL 15 Amp 10 Inch Portable Jobsite Table Saw:

SKIL 15 Amp 10 Inch Portable Jobsite Table Saw with Folding Stand- TS6307-00

The SKIL TS6307-00 Table Saw is just what you need if you want a compact and cheap table saw, especially if you are a serious DIYer. It comes with a heavy-duty saw made of steel that can cut through most things. The saw is easy to lift and can be folded up. It’s basically the same as a table saw that sits on a bench.

Even though the SKIL TS6307-00 Table Saw is small, it is a very powerful tool. It has a motor that can go up to 5000 RPM. This model is the best table saw for newbies because it has enough power and a strong blade to cut through most things.

The best table saw for DIYers is the SKIL TS6307-00.

But don’t expect it to cut through wood that’s 4 inches thick; you’ll just waste your time. The SKIL TS6307-00 is a very inexpensive compact table saw.

The SKIL TS6307-00 comes with a 10-inch blade, like most other compact table saws. It also has a blade with carbide teeth, which is a usual feature of portable blades. These blades aren’t the best, so you should look for better ones. After all, it’s hard and tiring to use a table saw with bad blades.

The saw can cut up to 24.5 inches wide, which is about what you would expect from a compact table saw. The SKIL TS6307-00’s biggest flaw is that its bevel change and blade height are both controlled by the same handle. Making it hard to set the exact angle or height.

Since the two levels are managed by the same handle, it’s hard to be precise. It’s not impossible to get accuracy with a single handle, but it takes a lot of time to get what you want.

You can get one of the best tabletop table saws, the SKIL TS6307-00 Table Saw, for a very low price. The motor on this compact table saw is strong, and the blades are sharp enough to cut through most materials. It’s the best table saw for DIY projects because of this.

But because it doesn’t have a good fence, it is hard to use. Even though the description says the fence lines itself up, it’s likely, not true. Before you use it, you should make sure it’s straight by adjusting it and checking it twice.

Another problem with the SKIL TS6307-00 is that it doesn’t have a way to deal with dust. Most table saws have one or two dust catchers that help keep the table clean and free of sawdust.

Modern safety elements like a riving knife, anti-kickback pawls, and a blade guard are also built into them. But they aren’t completely perfect. For example, the riving knife cannot be moved around the blade.

 So, if you want to make a cut that doesn’t go all the way through, you’ll need to take off the riving knives. This is a very bad thing for safety.


  • Strong and easy to carry
  • Strong motor
  • Cheap and easy to carry


  • The angle and blade height are both controlled by a single handle.
  • Not taking care of dust
  • Poor gate
  • Poor Glades

8)Shop Fox W1837 10″ 2 hp Open-Stand Hybrid Table Saw:

Shop Fox W1837 10" 2 hp Open-Stand Hybrid Table Saw

Most people like hybrid saws because they have features of both cabinet and contractor saws. However, most of the time, this means that the saw misses some important details. The Shop Fox W1837 10″ Hybrid Table Saw is not like this, and to be honest, it is one of the best table saws on the market.

The tool comes with a raised system and wheels that are already built in. This makes it easy to change the height of the tool and move it around without strain. Some of the best builder table saws have fences that are just as sturdy and accurate as this one.

Shop for the Best Hybrid Table Saw at Fox W1837 10″

You can easily lift the fence by giving the foot levers a small push. With this, you can set it up and get to work in less than a minute. Just because of this, we think this is the best jobsite table saw for home use.

You also have a lot of room to work with on the Shop Fox W1837 10″ Hybrid Table Saw. It has a work surface that is 40-1/4′′ x 27′′, which is the same size as most cabinet saws. It is also as strong as a cabinet saw.

It also has a 2 HP motor that can help it cut through most surfaces. The saws that are connected are of good quality and have a maximum speed of 3450 RPM. Also, the blade on the Shop Fox W1837 10″ Hybrid Table Saw can be tilted to 45 degrees, which makes it easy to cut miters, bevels, and chamfers.

The hybrid table saw also has a dust collection system. The tool’s dust is stored in an upper stand that is closed off. It is one of the best small jobsite table saws because the guards have flexible wings that keep dust from getting out of the sides of the cut.

The Shop Fox W1837 10″ Hybrid Table Saw is one of the best cheap table saws you can buy on Amazon. It has a dust collection system that keeps the tool clean and lets you make more than one cut. The W1837 also has a fence design that makes cutting straight and smooth.

If you’ve used a hybrid table saw before, you know that they tend to overheat, but that won’t be a problem with the W1837. It has a thermal overload protection device that keeps the machine at a constant temperature.

This method also helps keep the machine running if the current going into it starts to change. The W1837 is one of the best table saws for working with wood, and you will enjoy using it.


  • Solid cast iron trunnions reduce vibration and noise. 
  • 240 or 120 Volts 
  • Durable like most cabinet saws but lighter (250 pounds).
  • Powerful motor and rip capacity make it a top 10-inch table saw.


  • Not good at cutting large pieces of wood.

9)Makita 2705 10″ Table Saw:

Makita 2705 10" Table Saw

This saw is made so that you can easily carry it with you when you need to or put it away when you don’t. One of the most important things about this Makita saw is that it doesn’t need any tools to put together the blade guard. Some people might not care about this, but others might find it very helpful.

This table saw comes with a 32-tooth carbide-tipped blade, a rip fence, a miter gauge, a push stick, two blade wrenches, a socket wrench, a modular blade guard system, and a separate anti-kickback pawl. It can also be cut in more than one way and has a lot of space for accessories.

It has a strong 15-amp motor and can turn 4800 times per minute (rpm). It has a table that can be made bigger, giving you more space to work. It can be equipped with dado blades, which give it a lot of cutting power.

This machine is not a portable saw; it is a contractor saw. This means that there are a few things to keep in mind. First, it weighs a lot more than other types. This saw is over 80 pounds heavy. It also has handles that can’t be put away when not in use.


  • Tool-less blade guard
  • Strong motor
  • Can use Dado blades


  • Not a good fence
  • Since the saw weighs 90 pounds, a stand with wheels could be helpful.

10)Milwaukee 2736-20 M18 FUEL ONE-KEY 8-1/4 in. Table Saw:

Milwaukee Electric Tools 2736-21HD Table Saw

Table saws tend to use a lot of power, which is why most of them have lines. They can’t do anything if they don’t have a lot of energy. The cord is important to the power of the tool, but it can also be annoying, especially when you have to move the tool.

Every year, new battery technologies come out that make it possible for saws like the Milwaukee Cordless M18 Fuel One-Key table saw to make more power without a plug. The saw runs on an M18 battery, which can cut 600 feet of a straight board before it runs out of power.

The Milwaukee Cordless M18 is the best cordless table saw.

You can use the saw for a long time without having to worry about the battery dying. We think this is the best compact table saw on the market right now because of this.

The POWERSTATE Brushless Motor in the Milwaukee Cordless M18 Fuel One-Key Table Saw can go up to 6,300 RPM. This is better than most saws that have a wire. Also, the REDLINK PLUS Intelligence is already installed, so you never have to worry about overloading, overcharging, or burning again. You won’t believe that this powerful table saw is cordless.

The rack and pinion fence makes it easy to move and cut accurately. Also, to make sure you are safe, the saw has riving knives that you can move around the blades and a place to store extra parts.

The Milwaukee Cordless M18 Fuel One-Key table saw is compatible with the ONE-KEY system. This makes it the first table saw that lets you connect your phone wirelessly to the tool. With this feature, you can keep track of how well your tool is working and where it is while using the best portable jobsite table saw 2023.

People love it so much because it can be used with ONE-KEY. Suppose you could keep an eye on your tool from 100 feet away. You don’t even need to put a battery in the tool; once it’s connected to your phone, you can start keeping an eye on it.

 You’ll also get regular information on how the machine is being used, and if something goes wrong, you’ll know about it.

The Integrated Tool Security works with the ONE-KEY feature. Together, you’ll learn about the newest ways to protect your machine from being stolen. There’s also a secret tool that gives you full power over your machine, and when it’s in range, only you will be able to see it.

Also, if the machine is stolen, you can shut it down completely from your phone. So, the person who stole it won’t really be able to use it.


  • Powerful and without a cord
  • Lasts a long time
  • REDLINK PLUS Intelligence to protect against overloading


  • Costs a lot.

Buying Guide, What to Consider When Buying the Best jobsite table saw?


In short, a table saw has more cutting power the more horsepower (hp) its motor has. Smaller benchtop saws with horsepower between 3/4 hp and 1 1/2 hp can cut most things that a more oversized table saw can cut, but they may not cut as smoothly as a contractor or cabinet saw.

 Be aware that these values are usually written in “amps” (like “15 amps”), which means how many amperes the tool draws. Benchtop tools are common on job sites and in workshops. They are used to cut shelves, hardwoods for a woodworking project, and pressure-treated boards for projects in the backyard.

Larger bench saws and contractor saws have motors that range from 2 to 4 hp, and most cabinet table saws have motors that are 5 hp or more.

 The more powerful motors can be used for longer without getting too hot, even if they are used a lot (like in a cabinet shop where they are used every day, all day, for years), and they can easily cut through thick materials like ironwood or Brazilian walnut.

Cutting Depth and Size of the Blade:

The name of a table saw is based on the size of the circle blade it can use. Most can use 10-inch blades, but a few can use 12-inch blades. 

The height and angle of the blade can be changed, so it can make cuts that are just a fraction of an inch deep or much deeper. Many of the new cordless or corded/cordless table saws have a 7-12-inch blade, which is the same size as a circular saw.

Most of the time, the blades on these saws are 10 inches or 12 inches long. Users of a 10-inch table saw can often make cuts up to 312 inches deep, which is enough to cut a 44 in half.

Capacity to Rip:

Table saws are the best way to cut big sheets of material, but the rip capacity, or the width of material that can fit between the blade and the fence, varies. Starter tabletop saws can cut up to about 18 inches, while professional cabinet saws can cut up to 60 inches or more.

Depending on the projects you want to do, choose a table saw with a big enough rip capacity to handle the size of the materials. For example, a saw with a rip capacity of at least 24 inches can cut pieces of plywood big enough for the sides and back of toy boxes that are 2 feet tall.

On the other hand, many professionals do this with track saws. Track saws are light and accurate. They can be used to cut down a door to make room for new flooring or to cut sheet stock to the right size for building a bench.

The Collection of Dust:

If you’re working in a closed workshop, dust collection ports will help keep the air clean and catch sawdust chips that would have to be swept up later. 

The dust ports on table saws are made to link to a regular shop vacuum. To get rid of dust and sawdust, users have to run the workshop Hoover while they use the saw.

When cutting synthetic materials outside, like composite decks or PVC trim, it’s a good idea to put a box or bucket under the saw to catch the shavings if the saw is set up on the grass. 

It also helps to stand on a big piece of cardboard or a drop cloth. When those shavings get in the grass, it’s hard to get them out.

Bottom Line:

People sometimes say that portable table saws do not have enough power. But the ten tools we have talked about above are almost certain to do the job if you need something simple and light for home improvement projects. Plus, if you have to move it around the shop, you will not hurt your back.

It is hard to choose just one winner from these ten. For the normal DIYer or home improvement fan, we have to go with the DeWalt DWE7485. We think the Bosch is better for someone who is more interested in building because it can stack dadoes.


Can a 44 be Cut with a 10-inch Table Saw?

Some table saws with a 10-inch blade can cut a 44 in one pass, but not many. Keep in mind that the term “44” refers to timber that has been measured and is actually closer to 312 inches square. Most 10-inch table saws can cut up to 38 of an inch, but most cuts can be finished by turning the piece over and running it through the saw again.

When you use a Table saw, where should you Stand?

Most of the time, you should stand behind the table of the saw and to the left of the blade. Make sure you are not stretching and that you are relaxed. If you are working with big sheets, you should have someone hold them up on the out-feed side.

What are the Five Rules for Using a Table Saw Safely?

Before you make any cuts, read the manual and get used to how the saw works.

  • Put on safety glasses and earplugs.
  • Use a push block instead of your fingers to move things through the blade.
  • Start the blade before you put something in it. Never put something in the blade and then turn on the power.
  • Unplug the table saw every time you want to change the blade.

Leave a Comment

Your email address will not be published. Required fields are marked *