Best Table Saw Under 400 Dollars

If you need a new table saw, you may wonder if you should spend more or less than $400. Table saw prices change a lot, making it hard to know where to begin. 

Here are the Top 10 best table saw under 400 in 2024, based on reviews from our team of experts and regular table saw users. Whether you’re a professional builder or just like to do things yourself, one of these table saws will fit your needs.

Our Recommendations Best Table Saw Under 400 Dollars:

10 Best Table Saws Under $400 Dollars

1)DEWALT DWE7485  Compact Jobsite Table Saw-Best Overall:

The DEWALT DWE7485 Table Saw is a good choice for a number of reasons. First, it’s small and light, so it’s easy to move around the shop or take to job sites. Second, it has a strong 15-amp motor that can handle almost any cutting job. Third, it comes with a 24.5″ rip fence that is easy to adjust so that you can make exact cuts. Lastly, it has a metal roll cage that makes sure the saw is strong and will last a long time.

It makes Rip cuts, crosscuts, bevels, and just about any other cut you can think of. With a 4-inch blade, it’s easy to cut through big pieces of wood. We discovered that it has a strong motor that gives it enough power to make even the toughest cuts.

Its small size and ability to be moved around make it easy to set up on any job site. We liked that the fence rails could be moved up and down with a rack and pinion. With this feature, the fence can be moved quickly and easily without moving the whole saw. The fence can be changed quickly and easily with one hand, leaving the other hand free to make changes to the workpiece.

It can rip up to 24.5 inches, so it can handle even the hardest cuts. The 15-amp motor is strong enough to handle even the most difficult jobs. The 15 Amp, 5800 rpm motor on the DEWALT DWE7485 Table Saw makes it one of the best compact job site table saws for making cabinets for less than $400.

The power line, fence, and guard parts can all be stored on board. So when it’s time to take it apart to move it or store it, everything fits right where it should. Its metal roll cage makes sure that the saw will last for a long time.

It can cut through 4×8 pieces of plywood. When you’re working on a project that needs a lot of plywood, this can save you a lot of time and help you get a more accurate cut.

There’s a store guard there. This lets you store your saw safely and securely when you’re not using it. This makes it a great choice for people who don’t have much room to store things. The store guard also keeps dust and dirt from getting into your saw, keeping it in great shape for years to come.

The DWE7485 only weighs 54 pounds, so one person can easily lift and carry it. Its small size also makes it easy to store in a truck or van. So, why don’t you just do it? Get one, and then get started on your projects.

Pros:

• Easy to use the blade
• Powerful saw
• Fence built in for extra safety
• Strong motor
• Portable

Cons:

• A little hard for some new people to set up.

2) SKIL 15 Amp 10 Inch Portable Jobsite Table Saw – Best Budget:

With a 64.77 cm Rip Capacity, the SKIL TS6307-00 saw can handle even the biggest pieces of wood. Second, the 15-Amp motor has enough power to handle even the toughest cuts. Third, the saw has a Mitre Gauge and a Fence, which help you make cuts that are straight.

With a 10-inch, 24-tooth carbide blade, it can cut bigger pieces of wood. This makes it a great choice for cabinetry and other woodworking projects. It can be cut at an angle of 90 degrees for 4 by 4 inches.

Rack and pinion fence bars are one thing that it has. This method makes sure that the fence is always in line with the blade, no matter where it is on the table. Because of this, it makes cutting much more accurate, which is important for any woodworking job.

It is handy that it comes with a folding stand that is built in. This makes it easy to move the saw from one place to another and makes it easier to store it when it’s not being used. The stand has wheels that make it easy to move, and it also has feet that can be used to level the saw on any surface.

The SKIL TS6307-00 Table Saw has an easy-to-use quick-release button that lets you make cuts quickly, safely, and accurately. The handle is on the front of the saw, and you only need one hand to use it. Just push the lever down to remove the blade guard, then move the blade to the desired position and let go of the lever. The guard will go back to its original place on its own, keeping your hands safe from the blade.

The DUST PORT ELBOW on the SKIL TS6307-00 Table Saw helps keep your work area clean while you’re working.

We like its Parallel Blade Alignment. This feature makes sure that the blade is always lined up with the miter holes, so you can be sure that your cuts will be straight.

The saw comes with a Lithium-ion battery, which gives the saw enough power to work at full speed. The battery also keeps the saw going at the same speed, which helps make sure that each cut is made accurately.

It comes with a 3 Year Limited Warranty that gives customers peace of mind when they use our goods.

Pros:

• Easy-to-use button
• Portable useful storage
• Powerful cuts a lot of power

Cons:

• No technology on the cutting edge

3)SKIL SPT99T-01 8-1/4 Inch Portable Worm Drive Table Saw-Best Quality:

This saw is made to be accurate and last a long time. It has a renowned worm drive and a table that has been finely ground. The heavy cast-iron table gives you a stable place to work, and the dust collection system built into it keeps your desk clean.

Its 24-tooth blade makes it easy to cut through wood, metal, and other materials cleanly and precisely. The saw also has a blade that can be changed, which makes it easy to cut at an angle. The rack and pinion method also makes it easy to change the depth of the blade, so you can make cuts that are either shallow or deep.

It has a strong motor that can cut through any cloth, and its small size makes it easy to move and store. With a depth of cut of 2.6 inches and a ripping capacity of 25 inches, it can easily cut through big pieces of wood.

The Skil SPT99T-01 Table Saw can last for years thanks to its strong metal cage. The metal cage also keeps dirt and other things from getting into the saw, so it stays like new for longer.

Its unique dual-field motor makes it great for ripping lumber and crosscutting plywood, among other things. The Skil SPT99T-01 table saw has a 15 AMP motor and a speed of 5300 rpm.

The saw comes with a 180-day “Stay True” promise and a 1-year limited warranty in case anything goes wrong.

Pros:

• All-metal frame
• Lightweight
• Rack and pinion system with high precision
• motor with two fields
• Legendary worm drive gears
• very sharp blade

Cons:

• Few possibilities

4)DEWALT DWE7480 10 in. Compact Job Site Table Saw:

The DEWALT DW745 and the DWE7480 look very much alike. Both are bright and have designs that are almost the same. But when it comes to what they have to offer, the two are different.

 It has the same 15-amp motor as the item on the list before it. But it is more powerful because it can go as fast as 4800 RPMs. A 24-tooth blade is powered by a motor that is the same as the one on the 745 units.

It doesn’t have the biggest RIP ability for its price range. It is smaller than what you get with other types, at 24.5 inches. Still, this RIP capacity is enough for most of the wood sizes you’re likely to cut at home.

When it comes to being right, it doesn’t let you down. The telescoping fence and rack are simple to put together. Also, they make it easy to cut straight because they stay in place. This is one of the best telescoping fences.

Pros:

• It is a table saw that is easy to move.
• The fence is one of the best I’ve seen on a table saw.
• The fence is easy to change, and you don’t need any tools to do it.
• The 24-tooth carbide-tipped blade is great for cutting almost anything.
• It is easy to carry.

Cons:

• The angle gauge isn’t very good.
• Not good for Dado blades.

5)Bosch 10-Inch Portable Jobsite Table Saw:

The WEN Jobsite table saw is a versatile piece of cutting tools that costs a bit more than the SKIL model we looked at before. It has a lot to give and is liked by both amateurs and professionals.

 The blade of this saw makes it one of the best job-site table saws. You get a blade that’s 10 inches long and can cut through wood that’s 3-1/8 inches thick. It is driven by a 15 amp motor that can turn the blade at up to 5000 RPMs.

Bevel cuts can also be made by adjusting the blade between -2 and 47 degrees. This makes it even more useful.

The fact that this saw’s table can be stretched on either side is very impressive. The table can get as big as 21-1/2 in. x 22-1/2 in. This means that this table saw can hold bigger pieces of wood.

Many of us don’t like how sawing makes a lot of dust. The dust chute on the back of this table saw is a big help. So you don’t have to worry about dust and pieces of wood saw.

Pros:

• Has a big cutting space on the table
• Can be used to cut through thick wood.
• Can make both straight and curved bevel cuts.
• It’s simple to use.
• Gives you the choice to make the table surface bigger.

Cons:

• It’s kind of loud.

6)Evolution Multi-Material Table Saw:

Its rip-cutting feature, along with its movable, full-length parallel fence and measuring rail guide, makes sure that square cuts are always accurate and smooth.

The blade can be set to 45 degrees of bevel tilt and 60 degrees of the miter, which covers all common cutting positions.

Also, the 28T Japanese TCT saw blade (tungsten carbide tipped blade) that comes with the table saw makes it easy to cut through steel, aluminum, wood with nails in it, plastic, and other materials.

The included push stick makes it safer to move offcuts, and the huge saw table, which is 47-1/4 x 25-3/16 inches, has extensions on both the left and right sides to hold wide workpieces.

Pros:

• It has a limited guarantee of 3 years.
• It’s easy to move around.
• It has a Hoover device to get rid of dust.

Cons:

• The setup could take a while.

7) Goplus, 10-Inch 15-Amp Portable Table Saw:

This Goplus table saw is one of the smallest on this list and the market as a whole. Though it is small, it has a lot to give in terms of performance and quality of construction.

This is one of many miter gauges that come with most table saws. This saw has a moving miter gauge that can be turned 45 degrees to the left or right. This means you can make exact cuts at an angle. This moving miter gauge can be set from -45° to 45° for a fine crosscut.

A 10-inch blade is on the saw so that it can cut. This is a round blade with 36 teeth and a carbide tip. A 15 amp battery gives it power. It can easily cut through any kind of wood at 5000 RPM and makes very little noise.

It has a safety switch that lets you turn it on or off. This switch will protect you if the power is too much. Also, it has a clear blade guard to keep people from touching the blade by mistake.

Pros:

• It is a table saw that is very light.
• Has a strong blade.
• Includes an adjustable miter tool for making cuts at an angle.
• Has a motor that is pretty strong

Cons:

• You won’t be able to connect saw dust to this saw.

8) RYOBI RTS08 13 Amp 8-1/4 in. Table Saw:

The Ryobi RTS08 is a cheap table saw that sells for less than $300. The 13 amp motor, on the other hand, makes it quite a nice little saw.

 The 13 amp motor is probably the best thing about this. It can spin the 8-1/4-inch blade at up to 5600 RPM, which is pretty good for a cheap saw. And while it doesn’t have enough power for heavy-duty ripping, it works well enough for most tasks.

Since this is mostly made for do-it-yourselfers and artists, it has great safety features. The first is the way the on/off switch is made. The second one is on a big red cover. When the button is hit, the saw turns on.

But you have to flip it to get the saw to work. So, turning off the saw is easy. On the other hand, the machine is almost impossible to turn on by accident. The saw also has pawls that stop it from kicking back and a riving knife.

 The ability to rip 12.5 inches to the right and 7 inches to the left isn’t that great. But for a saw like this, it’s good enough. It will be great for small jobs at home or in your small workshop.

 We all know how annoying dust can be when you’re working with wood. This Ryobi RTS08 is lucky because it has a dust chute to collect dust. This makes it less likely that dust will build up in the work area.

Pros:

• It’s light and portable.
• It’s powerful for its size.
• Dust chute provided.
• It has riving knives and anti-kickback pawls.
• It’s cheap.

Cons:

• It’s underpowered for intensive work.
• This saw vibrates, making it unstable.

9)SAWSTOP 10-Inch Contractor Saw:

Most DIYers and home handymen don’t need the power, size, or cost of a big table saw, but if you do, the SawStop CNS175-SFA30 Contractor Table Saw is the best tool. This strong table saw has a 1.75-horsepower motor that spins the 10-inch blade at up to 3,000 rpm.

 Because the frame is made of strong cast iron, you won’t have to worry about movements getting in the way of a perfect cut. And this saw can do all of them with the right blade: cross cuts, rip cuts, bevel cuts, miter cuts, bevel cuts, and dado cuts.

The SawStop table saw has a table that is 20 inches wide and 27 inches deep. With the extensions, you can make rip cuts that are as wide as 30.5 inches to the right and as wide as 16.5 inches to the left.

For bevel cuts, the blade can tilt up to 45 degrees to the left and cut up to 2-1/4 inches deep at that angle. When the blade is straight, you can make cuts up to 3-1/8 inches deep. There is a very exact miter gauge built in, and there are two miter slots to hold boards in place.

Even though any table saw could be dangerous, this one takes safety to a whole new level by having a sensor that can sense human skin and stop the blade in less than 5 milliseconds if it does. Overall, this is a tool for both pros and serious hobbyists who want the best saw performance.

Pros:

• Large rip capacity
• Performance that is reliable and right
• Cast-iron body

Cons:

• Heavy
• Expensive

10)RIGID 10 in. Pro Jobsite Table Saw:

Check out the RIDGID R5414 10-Inch Jobsite Table Saw if you need a strong, reliable table saw that is easy to move to where you need it. This 15-amp saw makes cutting 4×4 boards easy; it can do it in one pass. When the table is closed, it is 22 inches by 30 inches.

 If you pull out the fence rails, you get an extra 12 inches to the right for ripping big boards. It has SOFTstart technology, which gradually speeds up the motor when the power is turned on. This makes the toolless noisy and more accurate.

The 10-inch blade can go as fast as 5,000 rpm and can cut up to 3.5 inches deep at a 90-degree angle and 2.25 inches deep at a 45-degree angle. The saw comes with a strong, wheeled stand that can be folded up when the job is done to save space.

Pros:

• Large rip capacity
• Wheeled stand
• The showing was strong.

Cons:

• Some comments about rip fence quality.

Buying Guide, What to Consider When Buying the Best Table Saw under 400 Dollars?

Safety:

When using any power tool, safety is always the most important thing. Table saws are no different. Every saw we tested had a basic safety package that included a riving knife, anti-kickback pawls, and a blade guard. These features are important for making sure no one gets hurt, but they also make the saw easy to use.

A good riving knife keeps the cut material from sticking to the back of the blade, and anti-kickback pawls keep the workpiece from flying back at the user, which is dangerous. Lastly, blade guards help keep both the person using the saw and the saw itself from getting hurt. We chose saws with safety features we thought were good.

How Sharp and Big the Blade Is:

When picking a table saw, we also thought about how good the blade was. A sharp, well-tuned blade makes exact cuts with less effort. A dull or broken blade, on the other hand, can cause kickback and lead to dangerous mistakes. We also looked at the size of the blade. 

A bigger blade can cut through thicker materials, while a smaller blade is better for cutting through thinner stock. And we made sure to choose a blade with carbide teeth because they stay sharp longer and wear less than normal steel blades.

The Collection of Dust:

When choosing table saws, we also thought about how well they collected dust. Table saws make a lot of dust, which is bad for your health if you breathe it in. Some saws have built-in dust collectors that do a good job of keeping the work area clean. 

Others require you to connect an external vacuum cleaner or air filter system. In either case, make sure to choose a model that doesn’t make too much noise. You don’t want your shop to sound like a woodworking plant!

Portability:

When we tested the table saws, we thought about things like how portable they were and how much wood they could cut at once. We looked at how easy it would be to move the saw from one place to another to see how portable it was.

Capacity to Rip:

We thought about how wide a board the saw could cut for the cutting capacity. We also thought about how much the saw weighed and how big the blade was. Based on what we found, we think the best table saw is the one that fits your needs the best.

Bottom Line: Best Table Saw Under 400

If you want a table saw that won’t break the bank and will do the job, any of these ten will work well. Each one has its own pros and cons, so you should learn more about each one before making a final choice. We hope that this guide made your search a bit easier.

If you are looking for Best Table Saw Under 400 then DEWALT DWE7485 Compact Jobsite Table Saw is best for you

FAQs

Should I Oil the Motor that Drives My Table Saw?

Most tables saw drive motors come from the factory with the bearings sealed and oiled, so there’s no need to oil them. Still, you will need to use a dry lubricant to grease the hinge points and threaded rods. Graphite and silicone, which are both dry lubricants, don’t attract or hold sawdust.

How High Should the Blade Be Set?

Woodworkers have been having heated arguments about this question for years. The blade should be between 1/8 inch and 3/8 inch above your workpiece, which is the recommended standard.

Why does my Table Saw Need a Kickback Stop?

When two pieces of wood move toward each other and pinch the saw blade after being cut, this is called “kickback.” This can happen violently and without warning. When the pinch is strong enough to stop the blade from spinning, the board moves backward. Table saws have riving knives and other safety features to stop this from happening.

• Top 10 Best Table Saw Under 600 Dollars
• Best Table Saw Under 400 Dollars
• Top 9 Best Table Saw Under 1500 Dollars
• Best Table Saw Under 300 Dollars: (Top 10 Picks)
• Best Table Saw Under 1000
• 10 Best Table Saw For Beginners: (Top Picks & Reviews)
• Top 11 Best Table Saw Under 500 Dollars
• Best Hybrid Table Saw Under $1000