Woodcutting is not as simple as it looks. To cut a piece of wood properly, you need to be good at it and learn different ways to do it. In this article, we’ll show you how to cut a 60 degree angle on a table saw.
You can’t cut on an angle as easily as you do in any of your other jobs. It would help if you paid more attention to and did more with a piece of wood that was in a certain spot in front of you. Let’s take a look at how to use a table saw to cut an edge.
What does “Bevel Cut” Mean?
If you’re new to this field, you might not have seen this kind of job. Many people cut wood by putting the blade at a 90-degree angle to the wood. There are times when you need to put the blade at a different angle than the wood.
This is called a “bevel cut,” and it is done by cutting at different angles. You might have to deal with this process when making a new piece of furniture or adding drawings to the surface.
Now that you know what a bevel cut is, you can learn how to cut a piece of wood by following some steps. Here are the things you need to remember.
How to Use a Table Saw to Cut a 60-Degree Bevel?
One of the most common tools for cutting wood and making furniture is a table saw. If you want to get better results from your woodworking, you must follow the steps below. Using the following method will make the process easy and simple.
1. Perform Some Calculations:
Before beginning work, you must perform some mathematics. Because you cannot cut a 60-degree angle with a table saw if you position it at a 90-degree angle.
Therefore, you must ensure that the instrument is perfectly positioned in order to cut the timber precisely from the desired point.
The hill will keep changing the angles of many things. In this case, though, you need to take 45 away from 60 to get the position you need to place the blade.
This math is pretty easy, but if you need to find an angle in a bevel-cutting angle that isn’t one of these, you may need to use a different method.
2. Selecting the Proper Blade:
After figuring out the right angle, you have to choose the right blade and set it up. Yes, you do need to pick the right blade for the type of wood. It depends right on how hard the wood is and what other qualities it has.
For this job, you need to know what kind of wood it is. It will give you a general idea of the qualities of the material. Now, it’s easy to choose the right blade for each medium.
Another important thing to remember is the size of the blade, which needs to be on top for smooth cutting.
3. Position the Wood:
The next step is to put the wood against the blade’s teeth. This step is important because you have to focus on getting the shape you want at the end. If you don’t put the piece of wood in the right place, it won’t cut right or take the shape you want.
Look at the saw you’re using to cut it down as well. Because different types of saws will give the piece of wood a different shape. For perfect placing, you should put two pieces of wood next to the piece of wood you need. It will keep the piece from moving and give you a safe place to start cutting.
Putting the blade down is another important step before cutting. If you put the blade at the bottom of the piece of wood, you can’t cut it. The reason is that the blade can’t move to cut the piece.
So, you have to bring the blade to the top of the wood. It’s the first thing you have to do after putting the wood down. You can use the button next to the blade teeth for this job.
You only need to keep an eye on the position and move it until the top of the blade is a little higher than the top of the wood.
4. Start to Cut:
Once the wood is in place, you can use a table saw to cut it. If you follow the steps above, it could take up to a few minutes. Also, you should keep pushing the wood with the pieces that hold it up.
The piece of wood has a better shape because it was cut smoothly. It would be best if you could also turn off the saw or change the direction of the wood by using the switch to control the blades.
By doing this, you can cut the wood piece or sheet into the shape you want at the end of the process.
Tips for Using a Table Saw Precisely:
- Make sure to cut outside of the line so that the piece of wood you want to use will be the right size.
- Use a sharp knife with the right amount of teeth. If the saw blade has more teeth, it cuts better but takes longer, and if the teeth are big, it cuts quickly but roughly.
- If you are cutting wet wood or lumber that has been treated, use a blade that is made for that.
- If the length of the edge against the fence is shorter than the space between the fence and the blade, don’t use the rip fence to cut it.
- The table saw’s miter fence can help you make cuts that are perfectly straight because it is both parallel and perpendicular to the blade. This is a much better way to move the wood than with your hands.
Safety Considerations when Using a Table Saw:
- When operating the table saw, use eye and aural protection of industrial quality.
- When cutting, stand to one side of the saw blade; do not permit anyone to stand directly in front of a running saw blade.
- When using a table saw, mittens are not required. Additionally, remove any rings, bracelets, or other articles of apparel that could become entangled in the table saw or the material.
- Never raise the saw blade more than 1/4 inch above the material being cut.
- Before departing the saw’s work area, the blade must be lowered beneath the tabletop.
- To avoid injury in the event of a kickback, never remain behind or too close to the running blade. Kickback is incredibly hazardous and must be avoided at all costs.
Bottom Line: How to Cut a 60 Degree Angle on a Table Saw
You should now know how to use a table saw to cut a bevel at an angle of sixty degrees, thanks to the previous discussion. You need to keep these measures in mind if you want to attain the outcomes that have been anticipated of you.
In addition, it would be helpful if you were cautious while cutting because even a tiny error can cause you to cut your hand or fingers. Therefore, regardless of how much experience you have, it is dangerous to divert your attention away from the procedure.
FAQs
What is the Best Way to Cut with a Table Saw?
Remember these tips to make the cut as clean as possible: Make sure that the finished side of the wood is always facing up when you put it through a table saw. When you use your Power saw, do the exact opposite of what you just read. The part of your wood that you want to show must be on the bottom.
How Many Angles Can a Table Saw Cut?
A table saw can cut at more angles than other tools that cut across. Most radial arm saws and compound miter saws can only cut angles of 45 degrees or a little more. A table saw, on the other hand, can cut any angle between 0 and 90 degrees, as long as it has the right tools.
How Deep Can you go with a Table Saw?
From one table saw maker to the next, the maximum cutting depth changes a little bit. But if you look at the top-rated table saws, you’ll notice that almost all of the 10″ (25cm) table saws have a maximum cutting depth of 90 degrees between 3.2″ (8cm) and 3.5″ (9cm).
Related Posts: