Some of the best table saws on the market have hefty price tags attached to them, which can discourage you from getting one. Before you skip buying a table saw because of price, have you considered one priced below $200?
It is easy to think that you will be losing out on quality and performance by picking a budget table saw. However, the best table saw under 200 should be sufficient for most jobs, especially if you are a DIYer.
We have created a list of the best table saws in this price segment, which you can review and see which model works best for you.
Read More: Best Table Saws under $2000
Our Recommendations Best Table Saw Under 200 Dollars:
Image | Product | Details | Price |
---|---|---|---|
![]() |
SKIL 3550-02 7-Inch Wet Tile Saw – Best Overall | The Hydro lock mechanism is the finest. Portable Rust-resistant aluminum tabletop |
Check Price |
![]() |
Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw – Best Quality | lightweight Compact Fairly Strong This saw cuts wood, fiberglass, and metals. |
Check Price |
![]() |
Worx WX572L Portable Electric Table Top Saw – Best Budget | A 15-pound tool, Its top handle makes it portable. It costs less than other tabletop saws. handles 2x dimensional lumber |
Check Price |
Top 7 Best Table Saws Under 200
1)SKIL 3550-02 7-Inch Wet Tile Saw-Best Overall:
![SKIL 3550-02 7-Inch Wet Tile Saw](https://techysaw.com/wp-content/uploads/2023/05/SKIL-3550-02-7-Inch-Wet-Tile-Saw.jpg)
We are always on the lookout for a tile cutter saw that we can take with us. So when we found the Skil 3550-02 wet tile SAW, I was interested to see how well it works. And, to be honest, we didn’t think much of it at first.
The hydro lock device was the first thing that caught our attention. As people who have cut tiles before, we know that it can sometimes get messy. We liked the hydro lock method because of this.
This method works very well to keep the water away from the blade. This means less work to clean up and less chance that water will leak.
The 5 amp motor on this unit isn’t very strong, to be honest. But it’s easy to see why since it’s so small. A 12 or 15-amp motor would need a bigger size. Also, for the price, you get a motor that draws between 5 and 7 amps.
Still, it would have been nice to get a motor with at least 7 amps. But it’s not a big deal because we can still cut tiles up to 0.75 inches deep, which isn’t bad. When you consider that it can also make angle cuts, you have a great little saw.
So, even though the motor isn’t powerful enough for a professional, you can still use it for most DIY projects.
We’ve already said that this saw, which weighs 22 pounds, is small and easy to carry. Mostly because most of its body is made of plastic. The tabletop, on the other hand, is made of metal, which doesn’t rust.
Pros:
- The Hydro lock mechanism is the finest.
- Portable
- Rust-resistant aluminum tabletop
- Its cable wrap and 22-pound weight make it portable.
- Tile-cutting diamond blade
Cons:
- most parts are made of plastic.
- not suitable for professionals.
2)Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw-Best Quality:
![Rockwell RK7323 BladeRunner X2](https://techysaw.com/wp-content/uploads/2023/03/Rockwell-RK7323-BladeRunner-X2.webp)
We liked this little tool right away because you don’t need any other tools to use it. Wingnuts hold most of the parts in place. This includes the blade guard and the fence. So, if you want to take off the blade guard, all you have to do is loosen the wingnuts at the back.
As for the blade, there is a big red button on your right that you pull to the side to open the blade. This is helpful because it makes it easy to take out and put in the jigsaw blade.
With a 5.5 amp motor and a 3000 RPM blade speed, we were interested to see how it would cut through different layers of wood. First, we tried a 5/8″x5.5″x6′ fence board, which, we have to say, was easy to cut through.
We also tried putting a 24 through it to see how far it would go. It did get through it in the end, but it took its time. Obviously, it’s not the kind of saw you’d use to frame a house, but with a little care, it gets the job done.
You might also find it interesting that you can use this tool like a jigsaw. If you take off the guard arm and the fence, all that’s left is the blade on a jigsaw plate. And with these set-ups, you can make cuts that are round or even at an angle.
It won’t be as precise as a scroll saw, but it’s still pretty useful, especially considering how cheap it is.
This unit can be used as both a table saw and a scroll saw. It has a good stroke length of 3/4 of an inch. This is a good enough stroke length, and you should be able to cut through a variety of materials. Also, you can use this table saw to make cuts like those made by a jigsaw.
This saw can be used to make rip cuts, jigsaw cuts, and crosscuts, all of which require different types of table saw blades. You can quickly switch to a different blade when you need to because there is storage on board.
The second one lets you keep blades and other tools close by and is easy to get to.
Pros:
- lightweight
- Compact
- Fairly Strong
- Medium to tiny materials fit on the 15 3/4″ by 17″ tabletop.
- This saw cuts wood, fiberglass, and metals.
Cons:
- We do not recommend it for thicker wood parts.
- may not be suitable for a professional.
3)Worx WX572L Portable Electric Table Top Saw-Best Budget:
![Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw](https://techysaw.com/wp-content/uploads/2023/03/Worx-WX572L-5.5-Amp-BladeRunner-Portable-Electric-Table-Top-Saw.jpg)
The WORX WX572L blade runner is similar to the Rockwell BladeRunner X2 in that it uses jigsaw blades instead of a circular blade. So, how does this small saw compare to its big brother and to regular table saws?
First of all, this tool is incredibly light. But just because something is light doesn’t mean it’s easy to carry. That’s why the hole at the top for the handle is useful. With this handle, moving the saw is easy.
The rubber feet are another part of its form that we have to talk about. The rubber feet help keep it steady and stop it from moving around. This is important because this is a tabletop tool that needs to be put on a stand or surface.
Since this is not a typical table saw, it can cut in more ways. It can make cuts from 0 to 60 degrees on both the right and left sides. This means that you can make more complicated circular cuts than you could with a regular table saw.
There are five jigsaw blades in the package. These tools are made to cut different kinds of things. You can cut steel, wood, metal, and ceramic tiles with these blades.
The saw can also be used to cut scrolls. More importantly, it’s easy to switch out the blades. At the top, there is a red button that helps open the blade slot so that it can be taken out or put back in.
Pros:
- A 15-pound tool,
- Its top handle makes it portable.
- It costs less than other tabletop saws.
- handles 2x dimensional lumber
- Five jigsaw blades for different materials.
Cons:
- Plastic is used to make this model.
4)RYOBI RTS08 13 Amp 8-1/4 in. Table Saw:
![RYOBI RTS08 13 Amp 8-1/4 in](https://techysaw.com/wp-content/uploads/2023/05/RYOBI-RTS08-13-Amp.jpg)
The RYOBI RTS08 is one of the smaller table saws on the market. And this is a normal table saw, not like the Bladerunner. So you can expect these tools to have all the bells and whistles we’ve come to expect from them.
Let’s talk about the tabletop. This table saw is meant to be small, but we found that the tabletop was big enough. It is 25 inches by 17 inches, which is enough space to work with.
You get a blade guard, a rip fence, two wrenches, a push stick, and a miter measure right out of the box. And, as you might guess, we had to set it up before we could use it.
But this wasn’t a big deal because everything was easy to put together. The rip fence is easy to attach to the back of the saw and is held in place by a clip on the front. A slot for the miter gauge is right in front of it.
The blade guard was a little harder for me to put on, though. The trouble is that it’s hard to figure out how to set it up right away. First, take off the yellow cover at the bottom of the blade and riving the knife. Still, it was pretty easy to set up as a whole.
The 13 amp motor on this unit will seem weak to most experts. But it will be strong enough to use at home. It can turn the blade as fast as 5600 RPM. This is a good all-around saw that is great for use at home.
You don’t have to try to put the blade guard on, but we wouldn’t recommend it. This is especially true since the blade guard has pawls that stop the blade from kicking back. These will help people who have never used a table saw before.
Pros:
- Anti-kickback pawls, riving knife, and blade guard.
- Compact and lightweight.
- Dust chute included.
- Most small-to-medium projects can handle 5600 RPM blade speed.
- Large tabletop
Cons:
- This is not the strongest saw on the market.
- When making some harder things, you have to work hard.
5)INTRADIN M1H-ZP3-254 2701S042 10″ Table Saw:
![INTRADIN M1H-ZP3-254 2701S042 10" Table Saw](https://techysaw.com/wp-content/uploads/2023/05/INTRADIN-M1H-ZP3-254-2701S042-10.jpg)
This Intradin table saw comes with a stand that holds a circular saw blade that is 10 inches long. With a 120-volt, 15-amp motor, this table saw is strong enough to cut through 3-inch wood.
The one-piece table and the stand together weigh 43 pounds. Unfortunately, the table saw isn’t very portable because the table and the stand are linked and the legs don’t fold.
You can change the height of the blade, and you can tilt it from 0 to 45 degrees, which makes it easy to make sharp cuts.
A miter measure is a tool that helps you cut angles up to 45 degrees.
This table saw is made for small projects around the house, but it can also be used to cut bigger planks with some restrictions.
Pros:
- Can work with wood which is a good size for most home projects.
- You can change the depth of the cut just right.
- Service after the sale is good.
- Can take care of small, easy jobs
Cons:
- For more stable operation, a lightweight build may be a little too flimsy.
6)Huanyu Mini Table Saw:
![Huanyu Mini Table Saw](https://techysaw.com/wp-content/uploads/2023/05/Huanyu-Mini-Table-Saw.jpg)
The Huanyu small table saw is a professional-grade small table saw that can be powered by either 110v or 220v. It can also be used to cut many different things, like metal, wood, and tiles.
This portable saw has a power level of 300 watts and a cutting depth of up to 29 mm. The fact that you can move the blade up and down was something I really liked. This means that the cutting depth can be changed from 0 to 29 mm. Not bad for a table saw from a name you haven’t heard of.
This saw is one of the smallest on the list. It is 30 cm long, 15 cm wide, and 13 cm high. This also means that you don’t need a lot of room to put it away. It is also light and easy to move around.
It also came with a drill chuck, which was another thing we liked. The range can also be changed from 0.6 to 9mm. Overall, this saw can do a lot of different things, like cutting, grinding, engraving, and drilling.
Pros:
- Great for little projects in various materials.
- Friendly service. After-sales service “forever friend”
- Adjustable blade height
- Seven RPM speeds
Cons:
- Only very small projects at home
- The wires could be better connected.
7)Leegol Electric Benchtop Router Table:
![Leegol Electric Benchtop Router Table](https://techysaw.com/wp-content/uploads/2023/05/Leegol-Electric-Benchtop-Router-Table.jpg)
One of the latest router tables on the market is the Legal Electric benchtop router table. It has some features that aren’t found on most other cutting tables, so we had to include them on our list.
If you’ve used a cutting table before, you know that most of them have MDF tops. So it was cool to see Leegol Electric try something new. This table is made of die-cast metal instead of MDF.
This means that, unlike most MDF tables, the tabletop won’t sag or bend over time.
Even though this is a cheap router table, it can handle bigger pieces of wood than most cheap models. This is because it comes with two tables that can be added on. The table is made of heavy-duty steel and is 8 inches by 18 inches.
This means that even the table’s addition will last a long time. Also, these growth parts can be taken off. This makes it easy to store, and the extension table is only put together when you need it.
Tools like table saws can be dangerous. A clear, movable guard is built into the Legal Electric. The second one covers your fingers without getting in the way of your view of what you’re cutting.
Pros:
- Includes two 8×18-inch extension tables.
- Die-cast aluminum tabletops are durable.
- Miter gauge provided.
- It’s cheaper than other router tables.
- A clear guard protects your fingers.
Cons:
- We did not like the shortened fence.
- The user manual was unclear.
Buying Guide, What to Consider When Buying the Best Table Saws Under 200 Dollars?
Budget:
The main reason to choose a table saw that costs less than $200 is to save money. So, when shopping for a saw in this price range, you should think about how much you can spend. Like anything else, some saws are more expensive than others.
Simple To Use:
If you’ve never used a saw before, it’s important to think about how easy it is to use. Some things make it easy to use a saw. The first is that the blades can be taken off and put back on without using any tools.
This makes it easy to change the saw blade or put it on without using any tools. How easy a saw is to use will also depend on where the settings are. All of the settings should be easy to reach.
Power:
The most powerful table saws that cost less than $200 usually have 500 watts of power. Usually, this is enough for most small to medium-sized jobs. All of the saws on my list have less than 500 watts of power.
In an ideal world, the more watts a saw has, the more powerful it is. When shopping for a saw in this price range, this is an important thing to think about.
Space:
Most table saws in this price range are small and easy to move around. Because of this, they take up less room than other table saws. Still, you should think about the size of a table saw in relation to how much storage room you have.
Portability:
How portable something is depends on its weight. Most of the time, you’ll want a table saw that is light and easy to move. Adding a handle will make it easier to carry. A saw should weigh between 40 and 52 pounds in order to be movable.
Precision:
A table saw should be able to cut through things precisely. This is a very important thing to think about. The sharpness of a table saw can be messed up by vibrations. So, rubber feet will be important to keep the precision and steadiness of the machine.
Safety:
It should be safe to use a table saw. So, when shopping for one, it’s important to look for safety measures. Handguards and riving knives can be used to stop slips.
Warranty:
Check to see if the type you are going to buy comes with a warranty. If something goes wrong, you want to be able to get help from the maker. Also, read the rules of the warranty to understand how the warranty works.
Bottom Line: Best Table Saws Under 200 Dollars
In conclusion, finding the best table saws under $200 can be a daunting task, but with a little research and guidance, you can find a suitable saw that fits your needs and budget. We have reviewed three top picks that are worth considering.
Firstly, the SKIL 3550-02 7-Inch Wet Tile Saw is an excellent choice for those who need a saw for tile cutting. It is versatile, durable, and easy to use, making it perfect for DIYers and professionals alike.
If you’re on a tight budget, the Worx WX572L Portable Electric Table Top Saw is an excellent option. It’s compact, lightweight, and comes at a very affordable price, making it perfect for those who need a saw for occasional use.
For those who prioritize quality and performance over the price, the Rockwell RK7323 BladeRunner X2 is the best option. It is versatile, durable, and can handle various cutting tasks with ease.
In summary, choosing the best table saws under $200 dollars comes down to your specific needs and budget. Whether you need a saw for tile cutting, occasional use, or heavy-duty tasks, the reviewed saws above have proven to be some of the best options in their respective categories. We hope that our review has provided you with useful insights and helped you in making an informed decision on the saw that is best for you.
FAQs about best table saws under 200
Best Table Saw Under 200 Dollars
SKIL 3550-02 7-Inch Wet Tile Saw is an excellent choice for those who need a saw for tile cutting. It is versatile, durable, and easy to use, making it perfect for DIYers and professionals alike.
Is it Safe to Use a Table Saw?
Yes, table saws are safe to use, especially tabletop table saws. But it is important to make sure they are safe before using them.
What Kind of Knife Should I Use?
What you want to do with your table saw will determine which blade you should use. A circle blade is best for cutting through thicker sheets. But you will need a jigsaw blade to cut out a scroll.
When Should I Use a Stand?
If your table saw is not attached to a desk or worktop, you will need a stand.
Related Posts:
- Best Table Saw Under 400 Dollars
- Top 9 Best Table Saw Under 1500 Dollars
- Best Table Saw Under 300 Dollars: (Top 10 Picks)
- How to Use a Table Saw For Beginners: (10 Easy Steps)
- Best Table Saw Under 1000
- How Many Amps Does a Table Saw Use?
- 10 Best Table Saw For Beginners: (Top Picks & Reviews)
- What is a Hybrid Table Saw?
- Top 11 Best Table Saw Under 500 Dollars
- Best Hybrid Table Saw Under $1000